Welcome to PCForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

SS30G2 and Celeron D

 
   Hardware Problem Solving Community! (Home) -> Shuttle RSS
Related Topics:
SB61G2 v3 and Celeron D - Does anyone know if the SB61G2 v3 support the Celeron D The Shuttle website says it supports this mean it will support Celeron D's?

WANTED: SV24 PCI riser card replacement - Anyone have a 90 degree one-slot PCI riser card that fits the SV24 chassis such that the PCI device installed will place the card at the correct height (at the height required to put the card's at the knock-out on the back of the..

No POST with Shuttle SS51G - Hi. I just bought a Shuttle SS51G, RAM, etc. through NewEgg and put it together. I'm getting no POST. The Power LED on the front of the case lights up, the fan and drives spin, and the LED on the system board lights up. ..

AN35N Ultra BIOS Problem?? - Hi, I am having some troulbes getting the AN35N Ultra I bought to recognize my WD 160G/8M HDD. What I have done: -First, I used the WDC Data LifeGuard Tools to partition the new HDD; the tool can see the size as 160G. But when I start to..

I'm deparate. How do I get a TV to work from sn41g2? - Hi I have to get my machine working into a TV before next How do I do it? I've tried TV to the phono adaptor supplied and I've looked for TV drivers under Monitor and on the NVidia CD but I've had no luck. I need to..
Next:  Spontaneous Restarts  
Author Message
Donald

External


Since: Mar 17, 2007
Posts: 2



(Msg. 1) Posted: Sat Mar 17, 2007 7:21 am
Post subject: SS30G2 and Celeron D
Archived from groups: alt>comp>periphs>mainboard>shuttle (more info?)

I just received a Shuttle SS30G2 and a Celeron D from Newegg.

I plugged in the cpu and a Corsair 512M DDR2 memory module.

Plugged in the power cord and VGA monitor on the back.

Push the power button, fans come on, LEDs come on, no video to the monitor.

I do not see any jumpers on the mother board, so I do not think its miss
configured.

Any suggestions about what I may have done wrong.

I contacted Newegg via email, but I will not hear from then until Monday.

I did notice that the cpu did not get warm when I checked it.

Thanks for any feedback.

donald

 >> Stay informed about: SS30G2 and Celeron D 
Back to top
Login to vote
Stephen

External


Since: Sep 17, 2005
Posts: 60



(Msg. 2) Posted: Sun Mar 18, 2007 12:57 pm
Post subject: Re: SS30G2 and Celeron D [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

On Sat, 17 Mar 2007 07:21:19 -0700, Donald <Donald.DeleteThis@dontdoithere.com>
had a flock of green cheek conures squawk out:

>I just received a Shuttle SS30G2 and a Celeron D from Newegg.
>
>I plugged in the cpu and a Corsair 512M DDR2 memory module.
>
>Plugged in the power cord and VGA monitor on the back.
>
>Push the power button, fans come on, LEDs come on, no video to the monitor.
>
>I do not see any jumpers on the mother board, so I do not think its miss
>configured.
>
>Any suggestions about what I may have done wrong.
>
>I contacted Newegg via email, but I will not hear from then until Monday.
>
>I did notice that the cpu did not get warm when I checked it.
>
>Thanks for any feedback.
>
>donald

CPU fan connected to the correct header?
CPU heatsink installed correctly?
All motherboard power cables connected?
Clear CMOS jumper on the correct pins?

Stephen
--

 >> Stay informed about: SS30G2 and Celeron D 
Back to top
Login to vote
Donald

External


Since: Mar 17, 2007
Posts: 2



(Msg. 3) Posted: Sun Mar 18, 2007 4:22 pm
Post subject: Re: SS30G2 and Celeron D [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Stephen wrote:
> On Sat, 17 Mar 2007 07:21:19 -0700, Donald <Donald.DeleteThis@dontdoithere.com>
> had a flock of green cheek conures squawk out:
>
>
>>I just received a Shuttle SS30G2 and a Celeron D from Newegg.
>>
>>I plugged in the cpu and a Corsair 512M DDR2 memory module.
>>
>>Plugged in the power cord and VGA monitor on the back.
>>
>>Push the power button, fans come on, LEDs come on, no video to the monitor.
>>
>>I do not see any jumpers on the mother board, so I do not think its miss
>>configured.
>>
>>Any suggestions about what I may have done wrong.
>>
>>I contacted Newegg via email, but I will not hear from then until Monday.
>>
>>I did notice that the cpu did not get warm when I checked it.
>>
>>Thanks for any feedback.
>>
>>donald
>
>
> CPU fan connected to the correct header?
> CPU heatsink installed correctly?
> All motherboard power cables connected?
> Clear CMOS jumper on the correct pins?
>
> Stephen

Thanks, all these items were checked and double-checked.

On one of the forums I found, it seems that the SS30G2 is known for
being finicky.

http://www.sudhian.com/index.php?/forums/

I'm going to send it back with the cpu I bought.

Maybe buying the pre-built version is the best for these new beasts.

donald
 >> Stay informed about: SS30G2 and Celeron D 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Shuttle All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]