Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

SY-KT333 - What northbridge chassis fan is used?

 
   Hardware Problem Solving Community! (Home) -> Soyo RSS
Next:  Problem with K8SD Pro (S2882-D) running Opteron 2..  
Author Message
MaxwellMI

External


Since: Apr 25, 2006
Posts: 2



(Msg. 1) Posted: Tue Apr 25, 2006 9:13 am
Post subject: SY-KT333 - What northbridge chassis fan is used?
Archived from groups: alt>comp>periphs>mainboard>soyo (more info?)

I have a Soyo KT333 Dragon Ultra Platinum. The tiny fan that sits on a
tiny heatsink over the VIA KT333 northbridge chip needs to be replaced.
I cannot find any specs for this fan on Soyo or Via websites. Neither
company has returned my emails.

What fan specs do I need to get when I order a replace this fan? It
attaches to a 3 pin power connector on the motherboard. I've looked at
NewEgg & TigerDirect but need help narrowing down what I need.

Thanks

 >> Stay informed about: SY-KT333 - What northbridge chassis fan is used? 
Back to top
Login to vote
farmuse10

External


Since: Feb 01, 2005
Posts: 97



(Msg. 2) Posted: Tue Apr 25, 2006 3:12 pm
Post subject: Re: SY-KT333 - What northbridge chassis fan is used? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

MaxwellMI RemoveThis @gmail.com wrote:
> I have a Soyo KT333 Dragon Ultra Platinum. The tiny fan that sits on a
> tiny heatsink over the VIA KT333 northbridge chip needs to be replaced.
> I cannot find any specs for this fan on Soyo or Via websites. Neither
> company has returned my emails.
>
> What fan specs do I need to get when I order a replace this fan? It
> attaches to a 3 pin power connector on the motherboard. I've looked at
> NewEgg & TigerDirect but need help narrowing down what I need.
>
> Thanks
>
just replace with a small Zalman passive heatsink, or any 40 mm fan,
or skip the fan unless you overclock those chips dont get too hot
anyway. you could remove the motherboard from case, remove heatsink,
apply fresh white thermal grease, clean heatsink and attach. If your
case has good air flow you should be fine. Those fans are a gimmick
really, what fsb are you running ? if 133 or 266 DDR ram then skip the
fan. I run two soyo pluses, one KT266A and a KT400 and when the fan goes
then that is what I am gonna do. Now my 400 fsb Abit is a different story.

 >> Stay informed about: SY-KT333 - What northbridge chassis fan is used? 
Back to top
Login to vote
MaxwellMI

External


Since: Apr 25, 2006
Posts: 2



(Msg. 3) Posted: Wed Apr 26, 2006 12:59 pm
Post subject: Re: SY-KT333 - What northbridge chassis fan is used? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

I'm running a single (soon to be double) stick of 133 ddr ram (pc2100).
Ventilation is ok but not ideal thanks to IDE cable management issues.
I don't overclock my system.

Thanks for the suggestions. There is a tiny heatsink beneath the fan.
I think I'll remove that annoying fan - run the system hard for 30
minutes - and see how hot the northbridge VIA KT333 makes the little
heatsink. If not, I'll need to follow your advice. Hope the current
heatsink is easy to remove.

Thanks.
 >> Stay informed about: SY-KT333 - What northbridge chassis fan is used? 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
kt333 + problem - When booting cold the cpu is recognised as a 2000+ with the clock speed of 1666.7, subsequent reboots show a 2000+ with a clock speed of 833 but it is still identified as a 2000+. cpuid and amdcpuid show the clock speed at an appropriate level. Does XP..

Recommendations for KT333 UP - I have put together a new computer based on a SY-KT333 Ultra Platinum and it is performing flawlessly. The specs are: 2600+ AthlonXP 2.13GHz 1 stick 512 Kingston 2700 ValueRam NVIDIA FX5200 AGP LiteOn DVD-RW IDE1 Master LiteOn DVD-Rom IDE2 Master Mitsumi...

SY-KT333 KT333 freezing - I have a Soyo KT333 mobo Dragon Ultra Edition (Black) for almost 2 years now and just recently it has been giving me problems. My system is setup with a custom water cooled system, Zalmon heatsink on the Northbridge and a nVidia 4200 128MB video card in....

Can't OC my KT333 DUP anymore. - I used to be able to OC my Dragon Ultra Platinum KT333 board and run it very stable for months on end using a multiplier of 13 @ 150Mhz giving me something just short of a 2400xp processor. I flipped everything back to "stock" settings for my ...

KT333 Dragon Lite - KT333 Dragon Lite How does one get the 333 bus? Is it not 166? I mean to say dont you set it in the BIOS at 166? It does not seem to be available. Soyo's website claims that this MB supports 2500+ to 3000+. I need a 166 buss do I not? I have....
   Hardware Problem Solving Community! (Home) -> Soyo All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]