Welcome to PCForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

SY-KT600 DRAGON Ultra

 
   Hardware Problem Solving Community! (Home) -> Soyo RSS
Related Topics:
KT600 Dragon Ultra Platium - Just finished building a KT600 Dragon Ultra Platium. Using Sata 1 & 2 for the hard drives and the standard IDE for my DVD Player and DVD Writer. 1 gig Ultra 400 ram. Does anyone have the settings for the BIOS? Thanks Ken

KT600 DRAGON ULTRA PLATINUM EDITION - I have KT600 DRAGON ULTRA PLATINUM EDITION I have Charter cable installed on my M/B Ethernet and add a second PCI Ethernet that connects to my home LAN. The problem is when I go into standby mode the LAN drops out and..

SOYO KT600 Dragon Ultra Platinum Issues? - Hi Everyone, Here is my current KT600 Dragon Ultra Platinum Creative Audigy Platinum ATI Radeon 9800 Pro {128mb} WinXP {Sp1a} Antec True Power 430 Power Supply I just wanted to check if anyone having issues running these..

KT600 Dragon Ultra Platinum Sata difference - Hi all, I am wondering if there is any in the two Sata Raid There is the VIA SATA Raid and the Sillicon SATA Raid whats the Any help would be grand, Thanks, Alec

KT600 Dragon Ultra Plat ATTENTION SOYO or ANYONE ELSE - I have a KT600 Ultra Platinum M/B, I can not get the M/B to see or use 3 400 MHZ dimms! Using PC 3200 DDR (400 mhz). Only 2 dimms at a time will work. With 3 dimms plugged in, no beeps, no nothing. Can't get to the bios or anything. Use only 2 dimms..
Next:  AMD Athlon-PECM, 1333 MHz (5 x 267) t'bird upgrad..  
Author Message
BruceD

External


Since: Nov 27, 2007
Posts: 1



(Msg. 1) Posted: Tue Nov 27, 2007 10:43 am
Post subject: SY-KT600 DRAGON Ultra
Archived from groups: alt>comp>periphs>mainboard>soyo (more info?)

I have a SY-KT600 DRAGON Ultra board that has functioned well since I
purchased it 2nd hand some years ago. One little problem that has aluded me
is that when it boots I always get the error "unknown Flash Type". This is
displayed after a list of all the PCI devices are shown just after POST.

I would like to fix it, if at all possable. I had contacted Soyo and did
get a response; but my chinese was lacking more that the chaps english who
was trying to help me. (:

 >> Stay informed about: SY-KT600 DRAGON Ultra 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Soyo All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]