Have a peep here in the ref. links in Computer Help desk, pretty sure
you'll get them from Soyo which I think I included.
http://www.howtofixcomputers.com/bb/viewtopic.php?t=186983
http://www.howtofixcomputers.com/bb/viewtopic.php?t=186979
But fans should spin as soon as you power the unit up because this
would have to happen before installing any driver.
You checked the fan and changed the PSU which seems logical, may be
worth checking for any bulged or swollen electrolytic capacitors
(caps for short), these usually have a domed top instead of being
nice n' flat and you may see gnge leaking from them, this stuff can
eat through the PCB laquer used to protect the copper tracks and then
eat them away. Sometimes checking the actual mobo PSU (Power Supply
Unit) connector for bad or burned soldered joints may help.
Would it be worth while checking the CPU.. could a electronic fault on
the mobo.... but I could be wrong and stand to be corrected.
You should get bios POST beep with just the CPU, Graphic and RAM, all
other drives inc. the HDD can be disconnected for bios boot, maybe
re-inserting these and cleaning and applying new heat sink paste to
the CPU may prove fruitful.
Davy
>> Stay informed about: Starting Problem, even fans do not spin etc.