Tyan Tiger MP S2460 Motherboard will not boot

hi ,

what about resetting cmos ? what about displayed post ? please give some
more info .



Poor Richard says...
> My systme would not boot. Checking inside power connection welded to
> motherboard. Purchased new mother board/power supply. System would
> display variable memory but no boot. Purchased/Installed 1Gb of new
> memory still no boot no action accept fans spinning???. Any advice
> greatly appreciatd! Poor Richard
>
>

--
gravity is still active
-<--@
gruss , wolfgang , v. von gunzo
 >> Stay informed about: Tyan Tiger MP S2460 Motherboard will not boot 

On Sep 2, 3:47 am, wolfgang schneider wrote:
> okay - something is defective !
>
> Poor Richard says...
>
> > On Aug 31, 9:22 pm, Poor Richard wrote:
> > > My systme would not boot. Checking inside power connection welded to
> > > motherboard. Purchased new mother board/power supply. System would
> > > display variable memory but no boot. Purchased/Installed 1Gb of new
> > > memory still no boot no action accept fans spinning???. Any advice
> > > greatly appreciatd! Poor Richard
>
> > No action available. Cannot access anything. Only 2-fans on CPU's
> > spinning!
>
> --
> gravity is still active
> -<--@
> gruss , wolfgang , v. von gunzo

Thanks for your info. I can only guess that 1 or both cpu's are bad.
Is there any way to test?
 >> Stay informed about: Tyan Tiger MP S2460 Motherboard will not boot 

okay - something is defective !

Poor Richard says...
> On Aug 31, 9:22 pm, Poor Richard wrote:
> > My systme would not boot. Checking inside power connection welded to
> > motherboard. Purchased new mother board/power supply. System would
> > display variable memory but no boot. Purchased/Installed 1Gb of new
> > memory still no boot no action accept fans spinning???. Any advice
> > greatly appreciatd! Poor Richard
>
> No action available. Cannot access anything. Only 2-fans on CPU's
> spinning!
>

--
gravity is still active
-<--@
gruss , wolfgang , v. von gunzo
 >> Stay informed about: Tyan Tiger MP S2460 Motherboard will not boot 

hi ,

if there is only one cpu okay , system will run with it . not very
likely that both cpu are broken .

what about the psu ? why welded to the mb ? my tiger-mpx is fuzzy about
voltages etc. , so maybe replace the powersupply .

Poor Richard says...
> On Sep 2, 3:47 am, wolfgang schneider wrote:
> > okay - something is defective !
> >
> > Poor Richard says...
> >
> > > On Aug 31, 9:22 pm, Poor Richard wrote:
> > > > My systme would not boot. Checking inside power connection welded to
> > > > motherboard. Purchased new mother board/power supply. System would
> > > > display variable memory but no boot. Purchased/Installed 1Gb of new
> > > > memory still no boot no action accept fans spinning???. Any advice
> > > > greatly appreciatd! Poor Richard
> >
> > > No action available. Cannot access anything. Only 2-fans on CPU's
> > > spinning!
> >
> > --
> > gravity is still active
> > -<--@
> > gruss , wolfgang , v. von gunzo
>
> Thanks for your info. I can only guess that 1 or both cpu's are bad.
> Is there any way to test?
>
>

--
gravity is still active
-<--@
gruss , wolfgang , v. von gunzo
 >> Stay informed about: Tyan Tiger MP S2460 Motherboard will not boot 

On Sep 3, 1:52 am, wolfgang schneider wrote:
> hi ,
>
> if there is only one cpu okay , system will run with it . not very
> likely that both cpu are broken .
>
> what about the psu ? why welded to the mb ? my tiger-mpx is fuzzy about
> voltages etc. , so maybe replace the powersupply .
>
> Poor Richard says...
>
>
>
>
>
> > On Sep 2, 3:47 am, wolfgang schneider wrote:
> > > okay - something is defective !
>
> > > Poor Richard says...
>
> > > > On Aug 31, 9:22 pm, Poor Richard wrote:
> > > > > My systme would not boot. Checking inside power connection welded to
> > > > > motherboard. Purchased new mother board/power supply. System would
> > > > > display variable memory but no boot. Purchased/Installed 1Gb of new
> > > > > memory still no boot no action accept fans spinning???. Any advice
> > > > > greatly appreciatd! Poor Richard
>
> > > > No action available. Cannot access anything. Only 2-fans on CPU's
> > > > spinning!
>
> > > --
> > > gravity is still active
> > > -<--@
> > > gruss , wolfgang , v. von gunzo
>
> > Thanks for your info. I can only guess that 1 or both cpu's are bad.
> > Is there any way to test?
>
> --
> gravity is still active
> -<--@
> gruss , wolfgang , v. von gunzo- Hide quoted text -
>
> - Show quoted text -

Wolfgang I am about to retire my mach not. I have ordered/installed a
new motherboard and power supply and just tried a new 1gb regestered
memory stick. Nothing but the fan motors run. The mach is
6 year old so I guess retirement is deserved. Thanks for all your
advice! Poor Richard.
 >> Stay informed about: Tyan Tiger MP S2460 Motherboard will not boot 

"Poor Richard" wrote in message

> My systme would not boot. Checking inside power connection welded to
> motherboard. Purchased new mother board/power supply. System would
> display variable memory but no boot. Purchased/Installed 1Gb of new
> memory still no boot no action accept fans spinning???. Any advice
> greatly appreciatd! Poor Richard
>
What PSU did you replace it with? the s2460 requires a PSU with 30A on the
5v line and many newer ones will not meet this requirement.
Check http://www.fractured.org/support/tyan2460.php as well
 >> Stay informed about: Tyan Tiger MP S2460 Motherboard will not boot