USB 2.0 External Hard Drive Crash

Thanks Roby,

Actually, the drive is working just fine, but you did answer my "what if"
question.

"If/when the drive is out of the enclosure, you can either buy a stand-alone
usb/ide adapter to access the bare drive or install it in another computer."

That's what I wanted to know.......oh, I'm a palm treo user and it already
does most of what the iphone proclaims except for the fancy GUI stuff LOL

Thanks again,
Dennis

Or, just buy an iphone.
"Roby" <roby.RemoveThis@no-address.net> wrote in message
news:4687d0ea$0$16606$4c368faf@roadrunner.com...
> dennis wrote:
>
>> I just moved a significant amount of data from my internal backup hard
>> drive to an external hard drive. In the past, I have had hard drives bite
>> the dust and when that happened, I switched the drive from master to
>> slave
>> and was able to access the data.
>>
>> Does anyone know what to do if an external drive becomes inaccessable?
>>
>> Thanks,
>> Dennis
>
> "Inaccessible" comes in a lot of flavors. Do other usb devices still work
> on this machine? Have you tried to read the external drive on another
> machine (yours or somebody else's)? In other words, do some experiments
> to
> localize the problem. Maybe your computer is the problem.
>
> The hard drive in your external HD is a garden-variety 2-1/2" or 3-1/2"
> drive connected to a usb/ide adapter. Opening the enclosure without
> destroying it may be challenging. Leave this for last. At worst, you
> can buy a new (empty) enclosure to hold this (or successor) drive.
>
> If/when the drive is out of the enclosure, you can either buy a
> stand-alone
> usb/ide adapter to access the bare drive or install it in another
> computer.
>
> Or, just buy an iphone.
 >> Stay informed about: USB 2.0 External Hard Drive Crash 

On Sun, 1 Jul 2007 10:06:08 -0400, "dennis"
<dennis RemoveThis @home.net> wrote:

>I just moved a significant amount of data from my internal backup hard drive
>to an external hard drive. In the past, I have had hard drives bite the dust
>and when that happened, I switched the drive from master to slave and was
>able to access the data.

That's a bit odd, usually a drive does not fail then become
accessible again merely jumpering from master to slave.
Most likely situation there is that the data cable was bad
but temporarily workable again when shifted slightly during
the rejumpering, the other drive on same cable is the
problem, or you live in a very hostile enviroment (humidity
plus dust, etc) that has fouled the jumper contacts and
changing jumper settings just wipes the contact metal so it
makes a good connection again.


>
>Does anyone know what to do if an external drive becomes inaccessable?
>

Take it out of the enclosure, first ready the system (enough
free space and a data recovery program installed already),
turn the system off, mount the formerly-external drive in
the system, turn system on and immediately try to copy off
the data (as soon as OS loads, don't first put more wear on
the drive by running the HDD manufacturer's diagnostics,
"yet").

If a plain copy attempt doesn't work it's time to run the
data recovery software. If that doesn't work, decide if
data is worth a large data recovery center fee, or if it's
then time to run HDD manufacturer's diagnostics and RMA the
drive to manufacturer if still under warranty.
 >> Stay informed about: USB 2.0 External Hard Drive Crash