VNF3-250 & WD800 SATA hard drive isntall problem

FAQ

Profile

VNF3-250 & WD800 SATA hard drive isntall problem

Hardware Problem Solving Community! (Home) -> Chaintech

Next: Make a 4x6 print at Walmart with 1024 x 768 jpegs..

Author

Message

John C

External

Since: Oct 05, 2005
Posts: 1

(Msg. 1) Posted: Wed Oct 05, 2005 9:51 pm Post subject: VNF3-250 & WD800 SATA hard drive isntall problem Archived from groups: alt>comp>periphs>mainboard>chaintech (more info?)

VNF3-250 with AMD 2800+ 2 x 80gig maxtor ATA drives cdrw, dvdrw 2 x 512 Corsair Win XP Pro 430W Antec ps Struggling with installation of Western Digital 80 gig SATA hard drive. Windows sees new device but does not know it is a hard drive. SATA drivers installed. Any and all suggestions/directions welcome. Thanks, John >> Stay informed about: VNF3-250 & WD800 SATA hard drive isntall problem

Display posts from previous:

Related Topics:

VNF3-250 ram still at 333 - Well,I guess this is still broken in the latest BIOS. My ram speed is reported at 333(plus overclock) in the latest BIOS,version 3.0.The original BIOS had it reprtd correctly,but was screwed up in other ways.I'm going to e-mail Chaintech about it,but I'm...

VNF3-250 @ 240 MHz - Nothing to shout about I know, but I never got past 220 MHz without getting a Prime95 error before on this board! :-) Bus = 240 MHz HT = 3x Ram: AUTO / 2T / 2.5-4-4-10 AGP = 67 MHz Cheers, Ed -- Chaintech VNF3-250 / BIOS 10-19-2004 3200+ Newcastle /...

Chaintech VNF3-250 Anyone on this NG have it? - If you do, does your CMOS have the problem of locking your keyboard when you select USB Mouse support? Thank you for your pertinent responses, Wayne

Chaintech VNF3-250 - Hello, Anyone here using the VNF3-250 and if so what do you think of it? Thanks, Ed

VNF3-250 setup - Setting up this board in a dual boot 98SE/2KPro config. Stupid me,I didn't prepare either OS before replacing mobo/cpu.Should have delted the System Devices first. Now,I've got 4 copies of PCI Satndard Host PCI Bridge and a couple copies of PCI to PCI..

	Hardware Problem Solving Community! (Home) -> Chaintech	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum