Visiontek 9200se AGP prob!

External Since: May 13, 2004 Posts: 1

I have a Visiontek 9200Se 128mb AGP card. Non of its acceleration features
work at all. I have a abit-VT7 motherboard. I have installed the via4-1
drivers. I can see the card is sharing irq 11 with like 6-8 devices. I can
prob change the system to a "standard pc" so I can have the card run on IRQ
10. However if I do this win2k has no way to auto allocate the correct
memory resource ranges for that change... So I dont know what to do. I
have emailed visiontek support, so far they have only asked me what
accelerations don't work, without any possible workaround!

Thanks,
CP

External Since: May 16, 2004 Posts: 1

The overclocking does not work on the 9200. I am not sure why they ship the
board with the software. You can use other software to overclock the card.

Jay

"Chaos" <ChaosBlizzard7c1.DeleteThis@hotmail_nospam.removenospamandthis.com> wrote in
message news:O_Poc.45106$mX.16057256@twister.nyc.rr.com...
> I have a Visiontek 9200Se 128mb AGP card. Non of its acceleration
features
> work at all. I have a abit-VT7 motherboard. I have installed the via4-1
> drivers. I can see the card is sharing irq 11 with like 6-8 devices. I
can
> prob change the system to a "standard pc" so I can have the card run on
IRQ
> 10. However if I do this win2k has no way to auto allocate the correct
> memory resource ranges for that change... So I dont know what to do. I
> have emailed visiontek support, so far they have only asked me what
> accelerations don't work, without any possible workaround!
>
> Thanks,
> CP
>
>

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.683 / Virus Database: 445 - Release Date: 5/12/2004