Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

X5DA8 Driver CD Help Needed Please

 
   Hardware Problem Solving Community! (Home) -> Supermicro RSS
Next:  Fried P4STA - what to do?  
Author Message
Graffnoir

External


Since: Nov 08, 2003
Posts: 1



(Msg. 1) Posted: Sat Nov 08, 2003 7:19 pm
Post subject: X5DA8 Driver CD Help Needed Please
Archived from groups: alt>comp>periphs>mainboard>supermicro (more info?)

Hello Group Smile

I wondered if someone could help me Please. I have the x5da8
motherboard and the supplied CD with the motherboard tells me its the
wrong CD when i try to install the drivers. I was supplied with the
CDR 006 revision 152 and even though some of the drivers do seem to be
working im getting multi audio controller, 2 PCI devices, 2 System
Interrupt Controllers and a USB Serial Bus Controller errors in the
device manager ( The little yellow circle with the ! in it ). I have
scanned the disk many times and i cant seem to find the drivers for
these devices. Any help at all would be wonderful. I have been to the
supermicro.com website and found a large list of CDR images to
download and im not sure which one i would need for my motherboard. On
another not the fans on the 2 X 2.8 Zeon chips are making a low
throbbing pulsating noise which im sure you can imagine is rather
annoying and i wondered if this was normal ( Im guessing it might not
be ) and if there was a solution or new fan i could purchase to
replace them. As i said before any help you can give me would be
appreciated. Thank you for reading this Smile.




On The Sea Of Infinite Tranquility
Sail On

Graffnoir

 >> Stay informed about: X5DA8 Driver CD Help Needed Please 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Anyone happy with the SM X5DA8 - The Adaptec 2010S seens to be a bottleneck restricting the speed of my SCSI raid arrays? I am trying to debug and setup an X5DA8 board and have been extremely disappointed in the slow SCSI drive speeds when using an Adaptec 2010S in the green PCI-X slot...

X5DA8: Any problems with it - I am going to replace my Tyan Thunder K7 board because I need a 64/66 slot for my LSI Logic MegaRAID 320-2 SCSI RAID controller. I am considering both the Tyan Thunder i7505 and Supermicro X5DA8. I have only used Tyan boards and never used any..

X5DA8 Advanced prcessor settings - Ihave an X5DA8 mb. with two 2 gig. micros.the bios reprts the speed as 800 meg . Is that the correct reading ? Also whats the freq. ratio for ? Super micro says to set it at 20, is this correct ? The book says " this setting allows you to specify ...

x5da8 5pin & 4pin +12V power - So what is the deal with the 8pin and th 4pin +12V connectors "required" for the x5da8 motherboard? What power supplies are compatible other than the supermicro's. I want to buy a Xaser case, but they don't have any details on the power supp...

X5DA8 + 2010S = slow SCSI performance - I am trying to debug and setup an X5DA8 board and have been extremely disappointed in the slow SCSI drive speeds when using an Adaptec 2010S in the green PCI-X slot. 4 Seagate ST336607LW drives only give 72.2 MB/s (across the whole 140GB) through put in...
   Hardware Problem Solving Community! (Home) -> Supermicro All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]