Welcome to PCForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

Want _underclock_ my processor...

  
   Hardware Problem Solving Community! (Home) -> Epox RSS
Related Topics:
8K7A+ and processor - Hi I have been in of an Epox 8K7A+ for over a year and a half. I have a 1.4 GHz Athlon sitting on it, and would now like to upgrade this Question is: would you advise that I either: 1) Replace both the board and the..

8KHA+ New Processor - I have an 8KHA+ with a 1400MHz Athlon and 256 PC2100 memory. The AMD Website says that this will take an Atlon XP 2600+. Could anyone who has done this, point me in the right direction to do the same. Are there any jumpers to be..

Best processor for 8RDA3+? - Hello! I have the 8RDA3+ board with an Athlon XP 2400+ proc but want to upgrade it. I'm thinking of upgrading to the Athlon XP 3200 Barton proc (400MHz FSB). Can anyone tell me how good the Barton chips are? Are they better than the Athlon XP..

.pdf processor spd on epox site - I have been on the epox site trying to fine the .pdf document for what boards support certain I can't find it. IF someone would know the url I would letting me know where it is. Thanks in advance

Epox 8K7A+ - Processor - Hi there, I have the Epox 8K7A+ board, and I currently run a 2200+ I had a look at the CPU support PDF file on their website, and it says that this is the max it will take. Does anyone know if it will take anything higher than this? Also,..
Author Message
hg

External


Since: Apr 03, 2007
Posts: 1



(Msg. 1) Posted: Tue Apr 03, 2007 5:57 am
Post subject: Want _underclock_ my processor...
Archived from groups: alt>comp>periphs>mainboard>epox (more info?)
Is it possible to _underclock_ my processor to as lower speed as possible while still being stable?
I have a Sempron 2800+ 64bit CPU (real speed 1.6ghz) running on an epox 8NPAJ(with lastest BIOS)
I have tried to underclock my settings but no luck- it just hangs even when slightly lower settings.Doesn't seem to run slower than
1.6ghz.

Any clues?

Thanks in advance.

 >> Stay informed about: Want _underclock_ my processor... 
Back to top
Login to vote
Ned

External


Since: Apr 03, 2007
Posts: 1



(Msg. 2) Posted: Tue Apr 03, 2007 3:10 pm
Post subject: Re: Want _underclock_ my processor... [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
As far as I know, you should be able to underclock as much as you want.
Makes no sense to me. What method did you use to UC? And if you don't mind
me asking, why underclock?

DaveL


"hg" <hg RemoveThis @hg.hg> wrote in message
news:IfqdnYkPUcQrgY_bnZ2dnUVZ8sOonZ2d@pipex.net...
> Is it possible to _underclock_ my processor to as lower speed as possible
> while still being stable?
> I have a Sempron 2800+ 64bit CPU (real speed 1.6ghz) running on an epox
> 8NPAJ(with lastest BIOS)
> I have tried to underclock my settings but no luck- it just hangs even
> when slightly lower settings.Doesn't seem to run slower than 1.6ghz.
>
> Any clues?
>
> Thanks in advance.
>
>

 >> Stay informed about: Want _underclock_ my processor... 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Epox All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]