Welcome to PCForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

activate SPDIF Out on 9cjs.

  
   Hardware Problem Solving Community! (Home) -> Chaintech RSS
Related Topics:
unable to activate eth on 7NJS - Hi evrybody, Hope some will have some clues cause I'm geting nervous. This PC is running XP pro, probably well patched ( ... ) BIOS is Version du BIOS/Date Phoenix LTD 6.00 PG, from NVIDIA Modèle AWRDACPI It's a home hand..

7NJL6---- I/O Plate and Spdif? - I'm about ready to jump on the 7NJL6 and Xp2900+ for $99 AR deal but I've seen a few posts this board comes with no I/O plate. Is that true and if yes is it a problem? Do you just put it in the case with no plate. Also

7AIA5 SPDIF enable - Is there a way to enable SPDIF on the Chaintech 7AIA5 board? I have the manual and it has the pin outs for the Can I just solder the SPDIF in/out lines to there pin or is there hardware missing on the board? Cheers, ..

SPDIF option on 7NJL6?? - Just got the MN last night and was looking through the manual. How do I get the SPDIF working? Where will the physical connector (for the SPDIF cable) be located? - Zilla

9CJS - Hello I have the Chaintech 9CJS I have build a new computer with this MB. I have the Corsair twin 2X256 PC3200, P4 2,4 ATI 9200 Dual Head and the Seagate Barracuda ULTRA ATA 120G Disk. I cant get this system to run stabile at..
Next:  Chaintech: Chaintech Zenith 7NJS  
Author Message
fredericmulot

External


Since: Dec 26, 2005
Posts: 2



(Msg. 1) Posted: Mon Dec 26, 2005 3:49 am
Post subject: activate SPDIF Out on 9cjs.
Archived from groups: alt>comp>periphs>mainboard>chaintech (more info?)
Hello,

I have a 9CJS motherboard, and I would like to activate tue SPDIF Out.

I wonder how to do that. When I plug an optical wire, ther is no red
light on the other side of this wire...

If someone know how to make the 5.1 available, it would be cool.

PS : Sorry for my english

 >> Stay informed about: activate SPDIF Out on 9cjs. 
Back to top
Login to vote
uddarts




Joined: Jun 15, 2005
Posts: 249



(Msg. 2) Posted: Mon Dec 26, 2005 1:17 pm
Post subject: Re: activate SPDIF Out on 9cjs. [Login to view extended thread Info.]
i don't have a board with the onboard envy24 audio chip, so i can't give you the exact settings.

are you going to digital speakers or a receiver?


you'll need to turn the digital on in the driver software. should be in the speaker setup area. if you have then i would try uninstalling and reinstalling the drivers with the multimedia card in the slot.

let me know how it goes.


ud

 >> Stay informed about: activate SPDIF Out on 9cjs. 
Back to top
Login to vote
avmaster2

External


Since: Jan 26, 2005
Posts: 53



(Msg. 3) Posted: Wed Dec 28, 2005 1:55 am
Post subject: Re: activate SPDIF Out on 9cjs. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
try the bios?


<fredericmulot DeleteThis @gmail.com> wrote in message
news:1135597753.648823.249440@g14g2000cwa.googlegroups.com...
> Hello,
>
> I have a 9CJS motherboard, and I would like to activate tue SPDIF Out.
>
> I wonder how to do that. When I plug an optical wire, ther is no red
> light on the other side of this wire...
>
> If someone know how to make the 5.1 available, it would be cool.
>
> PS : Sorry for my english
>
 >> Stay informed about: activate SPDIF Out on 9cjs. 
Back to top
Login to vote
fredericmulot

External


Since: Dec 26, 2005
Posts: 2



(Msg. 4) Posted: Thu Dec 29, 2005 1:59 am
Post subject: Re: activate SPDIF Out on 9cjs. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
yep, I've tried, but nothing changed...
 >> Stay informed about: activate SPDIF Out on 9cjs. 
Back to top
Login to vote
treefrog

External


Since: Sep 14, 2005
Posts: 8



(Msg. 5) Posted: Fri Dec 30, 2005 10:45 am
Post subject: Re: activate SPDIF Out on 9cjs. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Open the Envy24 control panel - it probably shows in the lower
right-hand corner of your screen and tab over until you find SPDIF
config tab. I think it requires you to reboot after you change the
setting.

On Wed, 28 Dec 2005 06:01:04 +0000 (UTC), "Ginchy"
<avmaster.TakeThisOut@BBBBBbtinternet.com> wrote:

>try the bios?
>
>
><fredericmulot.TakeThisOut@gmail.com> wrote in message
>news:1135597753.648823.249440@g14g2000cwa.googlegroups.com...
>> Hello,
>>
>> I have a 9CJS motherboard, and I would like to activate tue SPDIF Out.
>>
>> I wonder how to do that. When I plug an optical wire, ther is no red
>> light on the other side of this wire...
>>
>> If someone know how to make the 5.1 available, it would be cool.
>>
>> PS : Sorry for my english
>>
>
 >> Stay informed about: activate SPDIF Out on 9cjs. 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Chaintech All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]