allocating disk space for RAID by using partion magic 8

FAQ

Profile

allocating disk space for RAID by using partion magic 8

Hardware Problem Solving Community! (Home) -> ABIT

Next: Resolution FX5200

Author

Message

mamtim

External

Since: May 14, 2007
Posts: 1

(Msg. 1) Posted: Mon May 14, 2007 4:55 am Post subject: allocating disk space for RAID by using partion magic 8 Archived from groups: alt>comp>periphs>mainboard>abit (more info?)

i would like to ask for your opinion with the following issue: migrated my RAID array by adding two new hard disks to a single logical drive.The migration was successful.Now i have some GIGAS of unallocated space i'd like to join to existing logical drive. Did anyone actually perform this kind of work with Partition Magic?Is it recommendable? Thank you. >> Stay informed about: allocating disk space for RAID by using partion magic 8

Display posts from previous:

Related Topics:

KT7A-RAID: non RAID disk on RAID port - Hello, Is it possible to use the RAID ports as normal IDE port ?? I have no more available IDE ports... Thanks.

KT7A-RAID: XP doesn't boot with a disk on RAID - Hello, I have installed a new disk (Maxtor ATA133 160 GB - 8 Mb cache) on m KT7A-RAID (last BIOS: A9). As I don't have anymore available IDE port, I connected it to a RAID port (ATA100). Since then, I get with WIndows XP a blue screen, telling I should...

NF7-S SATA RAID-0, WD-SE: Anyone wanna compare disk benchm.. - Greetings Abit and Storage Newsgroup, I have just had a bit of spare time to finally do some proper tests on my SATA RAID-0 set-up. I was hoping that some of you out there would be able to run some tests yourself so we can compare results. Doesn't..

si3132 disappears after standby raid disk unavailable - i've got a aw8max mobo and i'm trying to use the si3132 raid controller. first of all, if i have it configured in the bios to be IDE, windows doesn't boot, and if i specify raid, (windows boots and i can configure a jbod for the one disk i have..

KT7A-RAID, Highpoint detects wrong disk size - I've flashed the latest ABIT BIOS (A9) modded with the latest Highpoint Driver. When I Ctrl-H into the Highpoint setup, it is detecting my 120GB Maxtor drives as only 9MB. I have each drive connected to a seperate channel. Both drives are detected..

	Hardware Problem Solving Community! (Home) -> ABIT	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum