 |
|
|
|
Next: AGP8 card advice needed, not for gaming
|
| Author |
Message |
External
Since: Oct 26, 2005
Posts: 2
|
(Msg. 1) Posted: Wed Oct 26, 2005 1:55 pm
Post subject: old board shuttle AE23 won't boot anymore
Archived from groups: alt>comp>periphs>mainboard, others (more info?)
|
|
|
I have a very old mainboard Shuttle AE23 v1.1 and a cpu intel pentium3
800mhz and some ram 256mb. these components were running in this very bundle
for many years. then i removed it and had it in a box again for some years.
now i wanted to build up a secondary system with these 3 parts, i attached a
power supply, a agp graphics card and a keyboard. there is nothing else
connected.
the problem is when i turn on the system, the cpu fan starts, power led
lights up, the keyboard leds are flashing, and then... nothing. not even a
beep, just a very quiet sort of blop coming out of the speaker, as if one
turns off a big stereo amplifier. i tried different ram, different graphics
cards, so this cant be the problem. I noticed the small led on the board did
not light up when i connected power to it. after i replaced the bios
battery, it lights up as soon as power is connected. but this did not help
anything.
why is this board not running anymore??? it did so for a long time with this
cpu...
thanks for any ideas, Rainer |
|
| Back to top |
|
 | |
Joined: Jun 15, 2005
Posts: 249
|
(Msg. 2) Posted: Wed Oct 26, 2005 2:50 pm
Post subject: Re: old board shuttle AE23 won't boot anymore [Login to view extended thread Info.]
|
|
|
|
|
| Back to top |
|
| |
External
Since: Sep 18, 2005
Posts: 24
|
(Msg. 3) Posted: Wed Oct 26, 2005 2:55 pm
Post subject: Re: old board shuttle AE23 won't boot anymore [Login to view extended thread Info.]
Archived from groups: alt>comp>periphs>mainboard>shuttle (more info?)
|
|
|
Is the graphics card new? Is it correct for the motherboard?
Are you using the shuttle case and original power supply"
Clark
Rainer Bitschi wrote:
> I have a very old mainboard Shuttle AE23 v1.1 and a cpu intel pentium3
> 800mhz and some ram 256mb. these components were running in this very bundle
> for many years. then i removed it and had it in a box again for some years.
> now i wanted to build up a secondary system with these 3 parts, i attached a
> power supply, a agp graphics card and a keyboard. there is nothing else
> connected.
> the problem is when i turn on the system, the cpu fan starts, power led
> lights up, the keyboard leds are flashing, and then... nothing. not even a
> beep, just a very quiet sort of blop coming out of the speaker, as if one
> turns off a big stereo amplifier. i tried different ram, different graphics
> cards, so this cant be the problem. I noticed the small led on the board did
> not light up when i connected power to it. after i replaced the bios
> battery, it lights up as soon as power is connected. but this did not help
> anything.
> why is this board not running anymore??? it did so for a long time with this
> cpu...
> thanks for any ideas, Rainer
>
> >> Stay informed about: old board shuttle AE23 won't boot anymore |
|
| Back to top |
|
| |
External
Since: Oct 26, 2005
Posts: 2
|
(Msg. 4) Posted: Wed Oct 26, 2005 4:55 pm
Post subject: Re: old board shuttle AE23 won't boot anymore [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
well, in fact i am using another power supply and have it outside any case
right now. but it is a atx compatible, it has enough power, so as far as i
know there cant be a problem with power supply. or do shuttle boards have
something special about that?? the graphics cards are correct, at least one
of them has to work.
"Clark" <who.TakeThisOut@whoknows.com> schrieb im Newsbeitrag
news:mHP7f.7167$tV6.1182@newssvr27.news.prodigy.net...
> Is the graphics card new? Is it correct for the motherboard?
>
> Are you using the shuttle case and original power supply"
>
> Clark
>
> Rainer Bitschi wrote:
>> I have a very old mainboard Shuttle AE23 v1.1 and a cpu intel pentium3
>> 800mhz and some ram 256mb. these components were running in this very
>> bundle for many years. then i removed it and had it in a box again for
>> some years. now i wanted to build up a secondary system with these 3
>> parts, i attached a power supply, a agp graphics card and a keyboard.
>> there is nothing else connected.
>> the problem is when i turn on the system, the cpu fan starts, power led
>> lights up, the keyboard leds are flashing, and then... nothing. not even
>> a beep, just a very quiet sort of blop coming out of the speaker, as if
>> one turns off a big stereo amplifier. i tried different ram, different
>> graphics cards, so this cant be the problem. I noticed the small led on
>> the board did not light up when i connected power to it. after i replaced
>> the bios battery, it lights up as soon as power is connected. but this
>> did not help anything.
>> why is this board not running anymore??? it did so for a long time with
>> this cpu...
>> thanks for any ideas, Rainer >> Stay informed about: old board shuttle AE23 won't boot anymore |
|
| Back to top |
|
| |
External
Since: Jan 18, 2004
Posts: 9
|
(Msg. 5) Posted: Wed Oct 26, 2005 10:21 pm
Post subject: Re: old board shuttle AE23 won't boot anymore [Login to view extended thread Info.]
Archived from groups: alt>comp>periphs>mainboard, others (more info?)
|
|
|
You will have to enter the bios and reset to the default settings. Then try
again. It could also be that the boards capacitors dried up with age. It is
something that if used, is better than being in storage. It keeps the
capacitors "formed" and able to accept the full charge as designed.
May be time for a new M/B.
--
Regards,
Richard Urban
Microsoft MVP Windows Shell/User
Quote from George Ankner:
If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!
"Rainer Bitschi" <csab6597.TakeThisOut@uibk.ac.at> wrote in message
news:435fae05$1@sia.uibk.ac.at...
>I have a very old mainboard Shuttle AE23 v1.1 and a cpu intel pentium3
>800mhz and some ram 256mb. these components were running in this very
>bundle for many years. then i removed it and had it in a box again for some
>years. now i wanted to build up a secondary system with these 3 parts, i
>attached a power supply, a agp graphics card and a keyboard. there is
>nothing else connected.
> the problem is when i turn on the system, the cpu fan starts, power led
> lights up, the keyboard leds are flashing, and then... nothing. not even a
> beep, just a very quiet sort of blop coming out of the speaker, as if one
> turns off a big stereo amplifier. i tried different ram, different
> graphics cards, so this cant be the problem. I noticed the small led on
> the board did not light up when i connected power to it. after i replaced
> the bios battery, it lights up as soon as power is connected. but this did
> not help anything.
> why is this board not running anymore??? it did so for a long time with
> this cpu...
> thanks for any ideas, Rainer
> >> Stay informed about: old board shuttle AE23 won't boot anymore |
|
| Back to top |
|
| |
External
Since: Sep 17, 2005
Posts: 60
|
(Msg. 6) Posted: Sat Oct 29, 2005 10:55 am
Post subject: Re: old board shuttle AE23 won't boot anymore [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Sat, 29 Oct 2005 10:36:49 +0200, "Rainer Bitschi"
<csab6597.DeleteThis@uibk.ac.at> had a flock of green cheek conures squawk out:
>
>"uddarts" <UseLinkToEmail.DeleteThis@www.hardwareforumz.com> schrieb im Newsbeitrag
>news:321716_139b7823eda5e28d676d824b8012bd2c@hardwareforumz.com...
>> "" wrote:
>> > I have a very old mainboard Shuttle AE23 v1.1 and a cpu intel
>> > pentium3
>> > 800mhz and some ram 256mb. these components were running in
>> > this very bundle
>> > for many years. then i removed it and had it in a box again
>> > for some years.
>> > now i wanted to build up a secondary system with these 3
>> > parts, i attached a
>> > power supply, a agp graphics card and a keyboard. there is
>> > nothing else
>> > connected.
>> > the problem is when i turn on the system, the cpu fan starts,
>> > power led
>> > lights up, the keyboard leds are flashing, and then...
>> > nothing. not even a
>> > beep, just a very quiet sort of blop coming out of the
>> > speaker, as if one
>> > turns off a big stereo amplifier. i tried different ram,
>> > different graphics
>> > cards, so this cant be the problem. I noticed the small led on
>> > the board did
>> > not light up when i connected power to it. after i replaced
>> > the bios
>> > battery, it lights up as soon as power is connected. but this
>> > did not help
>> > anything.
>> > why is this board not running anymore??? it did so for a long
>> > time with this
>> > cpu...
>> > thanks for any ideas, Rainer
>>
>> either test the 12v yellow + black lead off a 4 wire molex with a
>> digital multimeter or try a different psu.
>>
>> the psu may be getting tired. 
>>
>> ud
>>
>well, i tested another known working power supply unit, mainboard still wont
>boot.
>resetting bios as suggested in another post is simply not possible, because
>there is absolutely nothing on the screen.
>the following came up my mind lately:
>may it be possible that the bios chip got erased somehow, because the bios
>battery was definitely tired???
>i know this normally is not the case, but what is normal here?
>
There should be a jumper on the motherboard to clear the CMOS.
When the battery goes dead, only the CMOS data is affected.
Are there any bad capacitors?
Stephen
-- >> Stay informed about: old board shuttle AE23 won't boot anymore |
|
| Back to top |
|
| |
External
Since: Jan 18, 2004
Posts: 9
|
(Msg. 7) Posted: Sat Oct 29, 2005 11:00 am
Post subject: Re: old board shuttle AE23 won't boot anymore [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
When the battery goes dead the CMOS "IS" cleared. Insert a new battery and
the CMOS will go to the bios default settings, which may "not" be exactly
what you particularly need or want.
--
Regards,
Richard Urban
Microsoft MVP Windows Shell/User
Quote from George Ankner:
If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!
"Stephen" <yes.TakeThisOut@its.invalid> wrote in message
news:5b07m1dbob9ur8rij26p7b5ilvlndrfnas@4ax.com...
> On Sat, 29 Oct 2005 10:36:49 +0200, "Rainer Bitschi"
> <csab6597.TakeThisOut@uibk.ac.at> had a flock of green cheek conures squawk out:
>
>>
>>"uddarts" <UseLinkToEmail.TakeThisOut@www.hardwareforumz.com> schrieb im Newsbeitrag
>>news:321716_139b7823eda5e28d676d824b8012bd2c@hardwareforumz.com...
>>> "" wrote:
>>> > I have a very old mainboard Shuttle AE23 v1.1 and a cpu intel
>>> > pentium3
>>> > 800mhz and some ram 256mb. these components were running in
>>> > this very bundle
>>> > for many years. then i removed it and had it in a box again
>>> > for some years.
>>> > now i wanted to build up a secondary system with these 3
>>> > parts, i attached a
>>> > power supply, a agp graphics card and a keyboard. there is
>>> > nothing else
>>> > connected.
>>> > the problem is when i turn on the system, the cpu fan starts,
>>> > power led
>>> > lights up, the keyboard leds are flashing, and then...
>>> > nothing. not even a
>>> > beep, just a very quiet sort of blop coming out of the
>>> > speaker, as if one
>>> > turns off a big stereo amplifier. i tried different ram,
>>> > different graphics
>>> > cards, so this cant be the problem. I noticed the small led on
>>> > the board did
>>> > not light up when i connected power to it. after i replaced
>>> > the bios
>>> > battery, it lights up as soon as power is connected. but this
>>> > did not help
>>> > anything.
>>> > why is this board not running anymore??? it did so for a long
>>> > time with this
>>> > cpu...
>>> > thanks for any ideas, Rainer
>>>
>>> either test the 12v yellow + black lead off a 4 wire molex with a
>>> digital multimeter or try a different psu.
>>>
>>> the psu may be getting tired.
>>>
>>> ud
>>>
>>well, i tested another known working power supply unit, mainboard still
>>wont
>>boot.
>>resetting bios as suggested in another post is simply not possible,
>>because
>>there is absolutely nothing on the screen.
>>the following came up my mind lately:
>>may it be possible that the bios chip got erased somehow, because the bios
>>battery was definitely tired???
>>i know this normally is not the case, but what is normal here?
>>
>
> There should be a jumper on the motherboard to clear the CMOS.
>
> When the battery goes dead, only the CMOS data is affected.
>
> Are there any bad capacitors?
>
> Stephen
> -- >> Stay informed about: old board shuttle AE23 won't boot anymore |
|
| Back to top |
|
| |
| Related Topics: | Shuttle AN35N Ultra mboard won't boot up - Hi: I upgrade to a Shuttle AN35N/XP 2400+ combo last week. Last night, I left my computer running, left my place, and when I came back, the computer is off. I tried to turn it on, and nothing happened. I unplugged the power supply for a couple of..
Which N-Force2 board to buy.... - Hi there, My old Leadtek k7ncr18GM board just died due to the faulty capacitor problem so I need a new one.... Am presently tossing up between the Gigabyte GA-7N400 Pro2 and the Abit AN7. Which would you recommend and why? T.
On-board video.. PLS HELP. - I'm trying to install my new nVideia 5200 video card into my AGP slot. But No matter what I do, whenever I plug the nVideia 5200 into the motherboard, I cannot even boot the system, the power indicater on my computer light up and but the monitor screen..
Micro ATX Board With the Following! - Firewire, AGP (No built in video) for a Pentium 4 system. I'm hoping to keep it around 2.8 Ghz. Is there a website somewhere where I can do and choose what options I want; then bring up a list from multiple brands?
Please help identify a mother board - I have a mother board that has no identifing markings on it. I have searched for any numbers like an FCC ID and have had no luck. What I do know about the board. Amd k6-2 2 PCI 1 ISA 3 Memory onboard Video and Sound SIS 530 chipset bundled 10/100 card 2... |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
