Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

ct-7njl3/4 mobo , agp slot.

  
   Hardware Problem Solving Community! (Home) -> Chaintech RSS
Next:  CPU Temp - when to get worried ?  
Author Message
posdmr

External


Since: Dec 09, 2004
Posts: 1



(Msg. 1) Posted: Thu Dec 09, 2004 2:31 pm
Post subject: ct-7njl3/4 mobo , agp slot.
Archived from groups: alt>comp>periphs>mainboard>chaintech (more info?)
simple hardware question:

I Have new mother board. ChainTech 7nJL3.

No where in the manual does it mention the AGP slot rules.
Specifically ,what voltage cards ,is this slot designed to accept.?

and how to avoid blowing up my new mobo with a wrong AGP card.?

or does the board have auto detection of Voltage for this AGP slot.?
does anyone know?

thanks in advance.

bob a.

 >> Stay informed about: ct-7njl3/4 mobo , agp slot. 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
CT-7NJL3 moved from XP 2100+ to XP 2700+ now just wont boot - When this has the 2100 its rock solid, on all day. I put the 2700 in and its never booted at all at that speed, can get it to boot at 1500 but when I "load optimised" or basically do anything with the FSB settings it just won't boot, I get powe...

Not able to get 6 channels audio on 7njs mobo - Hi Anybody got this problem ? Running WinXP pro and on board audio CMedia. The SPDIF switch no2 is set to off as specified in other threads The BIOS settings is set to 6 channels. But only have 3 channels, 2 satellites and the sub running Any help would...

Chaintech Zenith Nforce 3 150 Mobo - Chaintech Zenith Nforce 3 150 Mobo I finished loading 2 HD 0f WinXP Pro SP1 32-bit this morning on the Chantech ZNF3-150 mobo. I'm using 2x512MB (1GB) KingMax DDR 2700 with no problem. It took a while because programs were really slow starting til I....

Chaintech finally posts version 2.0 BIOS for VNF3-250 mobo - http://www.chaintechusa.com/tw/eng/Download/dl_desc.asp?DCSNo=4&PISNo=276

7VJL Apogee how too O/C XP2400? - I have run my pc at mem 166 cpu 150 and booted into linux ok. so I think i am able to over clock this chip pretty good. I do not want to have my pci spec so far out though. How do you unlock the multipliers? I though all xp2400 were factory unlocked? I...
   Hardware Problem Solving Community! (Home) -> Chaintech All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]