Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

is fan control possible with VNF3-250 boards

  
   Hardware Problem Solving Community! (Home) -> Chaintech RSS
Next:  if case lies flat with mobo  
Author Message
epaton

External


Since: Jan 02, 2005
Posts: 10



(Msg. 1) Posted: Thu Mar 10, 2005 6:35 pm
Post subject: is fan control possible with VNF3-250 boards
Archived from groups: alt>comp>periphs>mainboard>chaintech (more info?)
i have a VNF3-250 with the latest bios and run linux, i have the cpu
change frequency thich is great, the problem is the fan still runs at
3000rmp then the temp is pretty low, ist it possible to reduce this speed
or wasnt fancontrol built into these motherboards

 >> Stay informed about: is fan control possible with VNF3-250 boards 
Back to top
Login to vote
Ed4

External


Since: Jul 07, 2004
Posts: 218



(Msg. 2) Posted: Sat Mar 12, 2005 10:47 am
Post subject: Re: is fan control possible with VNF3-250 boards [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
this post is not archived.

 >> Stay informed about: is fan control possible with VNF3-250 boards 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
VNF3-250 ram still at 333 - Well,I guess this is still broken in the latest BIOS. My ram speed is reported at 333(plus overclock) in the latest BIOS,version 3.0.The original BIOS had it reprtd correctly,but was screwed up in other ways.I'm going to e-mail Chaintech about it,but I'm...

VNF3-250 @ 240 MHz - Nothing to shout about I know, but I never got past 220 MHz without getting a Prime95 error before on this board! :-) Bus = 240 MHz HT = 3x Ram: AUTO / 2T / 2.5-4-4-10 AGP = 67 MHz Cheers, Ed -- Chaintech VNF3-250 / BIOS 10-19-2004 3200+ Newcastle /...

Chaintech VNF3-250 Anyone on this NG have it? - If you do, does your CMOS have the problem of locking your keyboard when you select USB Mouse support? Thank you for your pertinent responses, Wayne

Chaintech VNF3-250 - Hello, Anyone here using the VNF3-250 and if so what do you think of it? Thanks, Ed

VNF3-250 setup - Setting up this board in a dual boot 98SE/2KPro config. Stupid me,I didn't prepare either OS before replacing mobo/cpu.Should have delted the System Devices first. Now,I've got 4 copies of PCI Satndard Host PCI Bridge and a couple copies of PCI to PCI..
   Hardware Problem Solving Community! (Home) -> Chaintech All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]