Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

cannot format NTFS to Fat32

 
   Hardware Problem Solving Community! (Home) -> Hardware General RSS
Next:  HP card reader issues  
Author Message
sillyputty

External


Since: Jul 08, 2007
Posts: 2



(Msg. 1) Posted: Sun Jul 08, 2007 8:14 pm
Post subject: cannot format NTFS to Fat32

I'm building a win98 box and want to use an old 2GB HD that was on a
winXP system. The drive was formated NTFS and I can't get it to
reformat to Fat32. During Win98 setup it says the drive needs
formating, but neither the fdisk or format commands will work. Fdisk
says: "No fixed disks present" and format says: "format not supported
on drive C:"

 >> Stay informed about: cannot format NTFS to Fat32 
Back to top
Login to vote
Grinder

External


Since: Jun 07, 2005
Posts: 161



(Msg. 2) Posted: Mon Jul 09, 2007 12:56 am
Post subject: Re: cannot format NTFS to Fat32 [Login to view extended thread Info.]

sillyputty wrote:
> I'm building a win98 box and want to use an old 2GB HD that was on a
> winXP system. The drive was formated NTFS and I can't get it to
> reformat to Fat32. During Win98 setup it says the drive needs
> formating, but neither the fdisk or format commands will work. Fdisk
> says: "No fixed disks present" and format says: "format not supported
> on drive C:"

Ok, the second message first. You're not going to be able to format a
disk that you've booted from. I'm not sure what you're doing, but
that's the message you'll get if you attempt that. Boot from a floppy
disk that has fdisk and format (bootdisk.com probably has what you need.)

As for the first message, I would recommend disconnecting all hard
drives, except the one in question, and booting from your floppy disk.
Run fdisk. Can you see the hard drive? If you can't check your cabling
and jumpers. Still can't see it? If it's still a non-starter, get
diagnostic tools from the hard drive's manufacturer--generally on a
bootable floppy.

If you can see it in fdisk, drop all the partitions. Create a new
partition that spans the entire drive. (2 GB is ok for win98, but I
wouldn't mess with anything less.) At that point, you should be able to
drop out of fdisk and format the drive.

Oh, when fdisk starts up, say "Y" to Enable Large Drive Support?

 >> Stay informed about: cannot format NTFS to Fat32 
Back to top
Login to vote
jameshanley39

External


Since: Mar 12, 2007
Posts: 32



(Msg. 3) Posted: Tue Jul 10, 2007 10:30 pm
Post subject: Re: cannot format NTFS to Fat32 [Login to view extended thread Info.]

On Jul 9, 4:14 am, sillyputty <karmictara....TakeThisOut@2die4.com> wrote:
> I'm building a win98 box and want to use an old 2GB HD that was on a
> winXP system. The drive was formated NTFS and I can't get it to
> reformat to Fat32. During Win98 setup it says the drive needs
> formating, but neither the fdisk or format commands will work. Fdisk
> says: "No fixed disks present" and format says: "format not supported
> on drive C:"

Regarding the fdisk error. Fdisk can have issues viewing and deleting
NTFS partitions. Though i've had successes when its been just one
partition. Where I think it doesn't work, I got a different error.
Anyhow, you've probably run into one of these issues.
Regarding the format error. I think Format gives that error, because
normally, if you create a partition in e.g. fdisk, then when it comes
to formatting it, you can still go to C: , try to type DIR, and it
gives an error like "invalid boot media". THat's how it should be. You
can do format c: or I suppose, format c: /q, and it'll work. Whereas I
think when the partition is NTFS, DOS can't see it at all. And I guess
the format command has problems.


There are other ways to delete partitions.
An easy way,
Is to boot up from a win xp cd and use that to delete partitions. I
know you're not installing win xp, but you can still use the win xp
setup to do that. Then just quit the setup once the partition is
deleted
otherwise, it's finding some other software to do it. maybe some
little freeware prog somebody mentioned. Or a linux boot disk Or
plugging the hard drive into another machine, not booting from that
hard drive, and deleting the partition from e.g. win xp disk
management. You could do that quicker with a usb-ide adaptor, then
you don't have to open the machine.

win xp cd seems ideal if you have one lying around. I don't think i've
used it for that myself, but one could, and I prob would if fdisk
wasn't doing it. Or even anyway.. If I was more into linux i'd just
use a linux boot disk.
 >> Stay informed about: cannot format NTFS to Fat32 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Testing CPU & Mainboard - I have a few non-functioning mobo/cpu pairs. Question is which component of each pair (mobo-cpu) is defective? I assume a mobo will not function without a cpu, hence can I assume a POST diags card is no good without a known good CPU? If so this reduces u...

860416 - boot problem - hi i've an Albatron PX865PE Pro (v2.0) with the following configuration: CPU: intel P4 2.8 HT Enabled RAM: 3x256MB HDD: 2x; 100, 200 BIOS version: v1.24 VGA: nVidia GeForce FX 5200 the problem: sometimes when i power my computer on, it begins making a....

Motherboard problem? - Over the last several months my computer has become less and less dependable. With constant crashes for no reason (the computer just reboots) I thought there may have been something up with Windows. So I took to formatting the drive and re-installin...

KK400 problems: Via vs Iomega - I tried a KK400r as a possible upgrade from the XP333r. The results were less than satisfactory under Windows 2000, but under Windows 98 things seem OK. With Windows 98, you just change the board and reboot. Windows 98 pulls in the new drivers, asks you....

WPCREDIT/WPCRSET & BIOS on Iwill KK266-r - I own an Iwill KK266-r, and have always used WPCRSET to permanently change register 52 to the value EB to decrease idle temps on my my Athlon 1.33Ghz from around 45 degrees to around 30 degrees. I've been using the 03-07-01 BIOS which was very stable of....
   Hardware Problem Solving Community! (Home) -> Hardware General All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]