C2D did o/c, now won't

"Howard Goldstein" <hgoldste DeleteThis @mpcs.com> wrote in message
news:1193168131.18706@news.queue.to...
> On Fri, 19 Oct 2007 06:11:14 -0500, Ed M. <ed DeleteThis @edmedlin.com> wrote:
> :
> : "Howard Goldstein" <hgoldste DeleteThis @mpcs.com> wrote in message
> : news:1192733263.51859@news.queue.to...
> :
> : Mine is a Swiftech Quiet Power water cooled case. It is based on the
> Antec
> : P180. I only use the CPU block for now, but may go a bit further and do
> the
> : chipsets later.
>
> Are you going to chop up the heat pipe assembly to keep the two MOSFET
> sinks on board? Do you have anything on your video card? I'd like to
> something for my ATI 1950 which has a little jet engine on it I
> picked up two HR-09Us for the mosfets for when (if) my SE comes back.
> The HR-09U seems to work on the P5W but I don't have a way to quantify
> it. It's not as hot as I'd expect, I don't know if that's because
> it's dumping a lot more heat into the air or the thermal tape that
> came with it is insulating
>

I may just remove the heatpipe HSs and replace with waterblocks on the NB
and SB. I don't use anything on my two EVGA Superclocked 8800 GTX SLI'd
video cards as they are almost silent as they are.



Ed