Non functioning PnP USB Ports

I just built a new system using the MSI K8N Neo Platinum mobo in an
Antec Sonota case. I love the board and only have one small problem.
The USB ports plugged into the mobo (2 in the front of the case, & 2 on
the included D-bracket) do not seem to be working. Whenever I plug a
device, like a thumbdrive...) the led on the device blinks like it is
working, but it does not show up as a drive or as a new device... The
four leds on the D-bracket are all solid green, which I believe means
it is working fine, but no PnP.

Can anybody out there help me? I know I'm probably missing something
real simple. So I need to do something in the bios?

Thanks

On 6 Feb 2005 07:36:16 -0800, martin.j.leahy.DeleteThis@gmail.com wrote:

 >I just built a new system using the MSI K8N Neo Platinum mobo in an
 >Antec Sonota case. I love the board and only have one small problem.
 >The USB ports plugged into the mobo (2 in the front of the case, & 2 on
 >the included D-bracket) do not seem to be working. Whenever I plug a
 >device, like a thumbdrive...) the led on the device blinks like it is
 >working, but it does not show up as a drive or as a new device... The
 >four leds on the D-bracket are all solid green, which I believe means
 >it is working fine, but no PnP.
 >
 >Can anybody out there help me? I know I'm probably missing something
 >real simple. So I need to do something in the bios?
 >
 >Thanks

You might look at this on Antec's site. (question #9). Problem wire
will be the brown one. Also question #10 about the firewire. I had
the same problem with this case and a K8N.<!-- ~MESSAGE_AFTER~ -->