g450 question

If that does not work, try PowerStrip from Entech Taiwan

"Mike" <me DeleteThis @privacy.net> wrote in message
news:31mu7dF3cqvqcU1@individual.net...
 > "neon" <**navajo@neonfeather.com**> wrote in message
news:u6ecr09nqnqmavtenhu8d9dq4ol9botlfv@4ax.com...
  > > have an Asus P4B & a Matrox g450 etv. The Matrox supports 4x agp, as
  > > does the P4b. But when I examine using sandra i'm told
  > >
  > > SiSoftware Sandra
  > >
  > > AGP Bus(es) on Hub 1
  > > Version : 2.00
  > > Speed : 2x 66MHz (132MHz data rate)
  > > Maximum Data Transfer Rate : 4x
  > > Multiplier : 1/2x
  > > Fast-Writes Enabled : No
  > > Fast-Writes Support : Yes
  > > Side Band Enabled : Yes
  > > Aperture Size : 64MB
  > > Tip 2525 : Current AGP data rate not optimal.
  > >
  > > I'm running jumperfree & have set the bios for 4x. Any jumpers on the
  > > Matrox?
  > >
  > > any ideas?
 >
 > Try running Matrox's tweak utility (available on their website)
 > and set the card to 4X.
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: g450 question 

Thanks guys but no luck

tweak lets me go to 4x but reverts to default (2x) either after the
realtime or reboot.
entech changes to 4x but my machine hangs with frozen cursor


neon <**navajo@neonfeather.com**> wrote:

 >have an Asus P4B & a Matrox g450 etv. The Matrox supports 4x agp, as
 >does the P4b. But when I examine using sandra i'm told
 >
 >SiSoftware Sandra
 >
 >AGP Bus(es) on Hub 1
 >Version : 2.00
 >Speed : 2x 66MHz (132MHz data rate)
 >Maximum Data Transfer Rate : 4x
 >Multiplier : 1/2x
 >Fast-Writes Enabled : No
 >Fast-Writes Support : Yes
 >Side Band Enabled : Yes
 >Aperture Size : 64MB
 >Tip 2525 : Current AGP data rate not optimal.
 >
 >I'm running jumperfree & have set the bios for 4x. Any jumpers on the
 >Matrox?
 >
 >any ideas?
 >
 >tia<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: g450 question 

"neon" <**navajo@neonfeather.com**> wrote in message
news:mnjer0507m8h19rps2qrcq47qf5pemr4a4@4ax.com...
 > Thanks guys but no luck
 >
 > tweak lets me go to 4x but reverts to default (2x) either after the
 > realtime or reboot.
 > entech changes to 4x but my machine hangs with frozen cursor

I wouldn't lose any sleep over it. There's s*d all difference in performance
between 2x and 4x AGP for a card of this sort, so if it's working stably at
2x, leave it as-is.
--


Richard Hopkins
Cardiff, Wales, United Kingdom
(replace .nospam with .com in reply address)

The UK's leading technology reseller <a style='text-decoration: underline;' href="http://www.dabs.com" target="_blank">www.dabs.com</a>
Get the most out of your digital photos <a style='text-decoration: underline;' href="http://www.dabsxpose.com" target="_blank">www.dabsxpose.com</a><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: g450 question