 |
|
 |
|
Next: Screwed-up USB2 ports
|
| Author |
Message |
External

Since: Apr 21, 2005 Posts: 3
|
(Msg. 1) Posted: Thu Apr 21, 2005 9:55 am
Post subject: help for photoplay touch screen MOTHERBOARD Archived from groups: alt>comp>periphs>mainboard>chaintech (more info?)
|
|
|
|
|
| Back to top |
|
 |  |
External

Since: Apr 10, 2006 Posts: 1
|
(Msg. 2) Posted: Mon Apr 10, 2006 5:55 am
Post subject: Re: help for photoplay touch screen MOTHERBOARD [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
 |  |
| Related Topics: | 7njl6 blank screen at bootup - I have a 7njl6 with a Sempron 2500. When I turn the computer on, all the lights turn on, hard drive engages but no bios. I have tested the memory in another system and it is fine. I think my son may have been playing around in the bios but he won't..
7VJL Apogee how too O/C XP2400? - I have run my pc at mem 166 cpu 150 and booted into linux ok. so I think i am able to over clock this chip pretty good. I do not want to have my pci spec so far out though. How do you unlock the multipliers? I though all xp2400 were factory unlocked? I...
BIOS CHIPS : New Replacement Bios Chips or Re - Flash - visit www.bioschips.webhop.net For Replacement chips $14 re-flash of existing chip $8
Handigator - Rellay need some help. Hust installed a new 9cjs and everything seems to be working ok except the Handigator. Are there drivers, bois setting's, etc required to get this to work? Do I need to install IR support to XP? Any help will be great. Steve
need info on the 9EJS1 Zenith Cbox2 front panel audio conn.. - I would like to use the two audio jacks in my Cbox2 and I know that the mboard has the cable connector needed for that, but it can only be used with the mboard's onboard audio chip. I would like to use those two jacks with my Audigy 2 sound card. I've.. |
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|
 |
|
|