Tyan i7500 pro with dual xeon 1.7 shows only 800mhz

FAQ

Profile

Tyan i7500 pro with dual xeon 1.7 shows only 800mhz

Hardware Problem Solving Community! (Home) -> Tyan

Next: What is HSF meant to be?

Author

Message

William Larsen

External

Since: Feb 28, 2006
Posts: 1

(Msg. 1) Posted: Tue Feb 28, 2006 4:55 pm Post subject: Tyan i7500 pro with dual xeon 1.7 shows only 800mhz Archived from groups: alt>comp>periphs>mainboard>tyan (more info?)

I have an i7500 pro (S2721, rev. 1.00) with dual xeon processors, 1.7 ghz, SL5TE, and the bios reports only 800mhz for the processor speed. BIOS setup doesn't allow any changes to the CPU speed/ratio that have any affect. Anyone have any ideas? Thanks WL >> Stay informed about: Tyan i7500 pro with dual xeon 1.7 shows only 800mhz

Display posts from previous:

Related Topics:

Booting problem with Tyan s2668, one Xeon CPU ! - :!: First, there was a missing microcode update installed CPU'S message but I upgraded the Bios to version 1.05 and the message has gone away but . . . Now when I boot I have these two lines message : Remove all disks - Press a key to reboot. When I..

Tiger i7505 with dual 3G Xeon wont boot - Hi all, I'm building a server using a Tiger i7505 (S2668) and dual 3Ghz Xeon processors. When I try to boot, the POST Codes cycle through a bunch of codes right away and then goes through the following cycle: 38h - Shadow system BIOS ROM 29h -..

tyan 2875 and dual opteron 250s - I am using a tyan 2875 with dual opteron 250s for my file server. I am using the native intel gigabit NIC on the motherboard. I have a WD 740GD SATA drive, a WD 800JB PATA drive and a WD 2000JB PATA drive attached to this pc. I am running Windows XP SP...

Tyan s2466 and dual processor problems - I have a tyan s2466 dual mp board and have been runnog for about 6 months with a single processor with no problems. At Xmas I got another 2600MP and tried to install it. When the second processor is installed it won't even post. But if I remove the 2n...

Tyan S1662 Dual PPro - PSU question - Hi, I am building a Dual PPro166-512k system with: 256MB EDO memory 80GB harddisk via IDE controller card Matrox Millenium 4MB graphic card 2x NIC 10/100MBit CD + Floppy maybe ISDN, modem & sound card current ATNG 230W PSU has: 23A@5V 9.5A@12V Do I...

	Hardware Problem Solving Community! (Home) -> Tyan	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum