Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

k7s5a boot problem

  
   Hardware Problem Solving Community! (Home) -> Elitegroup RSS
Next:  Booting Problem  
Author Message
Harrie Geerts

External


Since: Aug 12, 2003
Posts: 7



(Msg. 1) Posted: Fri Aug 15, 2003 6:44 pm
Post subject: k7s5a boot problem
Archived from groups: alt>comp>periphs>mainboard>elitegroup (more info?)
I have an old version of the mainboard.

2400XP @ 2200 Mhz
ddram 512mb 2x147mhz
geforce4 ti4800SE Creative/MSI @ 300/660 mhz

Everything is fine, no crashes and BHD runs smoothly.

But when the pc is a time off and I put it back on, the cmos settings are
lost. My promise fasttrack TX2 won't boot normally. I first have to take out
the fasttrack, then making changes to te bios. Then the fasttrack in place
and making again changes to the bios and then everything is fine until de pc
is a while off.

Who know's solving this problem?

I try now if it happens also with 2x133 mhz.

Harrie Geerts

 >> Stay informed about: k7s5a boot problem 
Back to top
Login to vote
RonS

External


Since: Aug 15, 2003
Posts: 10



(Msg. 2) Posted: Fri Aug 15, 2003 6:44 pm
Post subject: Re: k7s5a boot problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Harrie Geerts wrote:

 > I have an old version of the mainboard.
 >
 > 2400XP @ 2200 Mhz
 > ddram 512mb 2x147mhz
 > geforce4 ti4800SE Creative/MSI @ 300/660 mhz
 >
 > Everything is fine, no crashes and BHD runs smoothly.
 >
 > But when the pc is a time off and I put it back on, the cmos settings are
 > lost. My promise fasttrack TX2 won't boot normally. I first have to take out
 > the fasttrack, then making changes to te bios. Then the fasttrack in place
 > and making again changes to the bios and then everything is fine until de pc
 > is a while off.
 >
 > Who know's solving this problem?
 >
 > I try now if it happens also with 2x133 mhz.
 >
 > Harrie Geerts
 >
 >
A great resource:
<a style='text-decoration: underline;' href="http://pub140.ezboard.com/bk7s5amotherboardforum" target="_blank">http://pub140.ezboard.com/bk7s5amotherboardforum</a><!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: k7s5a boot problem 
Back to top
Login to vote
RonS

External


Since: Aug 15, 2003
Posts: 10



(Msg. 3) Posted: Fri Aug 15, 2003 6:44 pm
Post subject: Re: k7s5a boot problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Harrie Geerts wrote:

 > I have an old version of the mainboard.
 >
 > 2400XP @ 2200 Mhz
 > ddram 512mb 2x147mhz
 > geforce4 ti4800SE Creative/MSI @ 300/660 mhz
 >
 > Everything is fine, no crashes and BHD runs smoothly.
 >
 > But when the pc is a time off and I put it back on, the cmos settings are
 > lost. My promise fasttrack TX2 won't boot normally. I first have to take out
 > the fasttrack, then making changes to te bios. Then the fasttrack in place
 > and making again changes to the bios and then everything is fine until de pc
 > is a while off.
 >
 > Who know's solving this problem?
 >
 > I try now if it happens also with 2x133 mhz.
 >
 > Harrie Geerts
 >
 >

Specifically:
<a style='text-decoration: underline;' href="http://pub140.ezboard.com/fk7s5amotherboardforumfrm10.showMessageRange?topicID=567.topic&start=1&stop=20" target="_blank">http://pub140.ezboard.com/fk7s5amotherboardforumfrm10.showMessageRange...picID=5</a><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: k7s5a boot problem 
Back to top
Login to vote
Andy23

External


Since: Jul 28, 2003
Posts: 3



(Msg. 4) Posted: Sat Aug 16, 2003 1:29 pm
Post subject: Re: k7s5a boot problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Hi Harrie,
Had the same problem with my pro board. Replaced the CR2032 CMOS
battery and now all is fine.
HTH

Andy Holmes.
andy.g6vtrnospam DeleteThis @virgin.net
 >> Stay informed about: k7s5a boot problem 
Back to top
Login to vote
Harrie Geerts

External


Since: Aug 12, 2003
Posts: 7



(Msg. 5) Posted: Sat Aug 16, 2003 5:25 pm
Post subject: Re: k7s5a boot problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
I solved it by keeping the resetbutton 10 seconds while powering on the PC.
No problems after that.

Harrie Geerts

"Andy" <andy.g6vtrnospam.TakeThisOut@virgin.net> schreef in bericht
news:d9urjvcookporhr969p5keodc680ci211u@4ax.com...
 >
 > Hi Harrie,
 > Had the same problem with my pro board. Replaced the CR2032 CMOS
 > battery and now all is fine.
 > HTH
 >
 > Andy Holmes.
 > andy.g6vtrnospam.TakeThisOut@virgin.net<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: k7s5a boot problem 
Back to top
Login to vote
joe f

External


Since: Aug 17, 2003
Posts: 1



(Msg. 6) Posted: Sun Aug 17, 2003 12:50 pm
Post subject: Re: k7s5a boot problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"Andy" <andy.g6vtrnospam.TakeThisOut@virgin.net> wrote in message
news:d9urjvcookporhr969p5keodc680ci211u@4ax.com...
 >
 > Hi Harrie,
 > Had the same problem with my pro board. Replaced the CR2032 CMOS
 > battery and now all is fine.
 > HTH
 >
 > Andy Holmes.
 > andy.g6vtrnospam.TakeThisOut@virgin.net
Hi. I hard soldered a battery case with two AA cells hoping this would
solve the bend clips etc issue, no chance!!
Just ordered an Arock board and will give up computing if this loses cmos as
well!!!<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: k7s5a boot problem 
Back to top
Login to vote
John Perry

External


Since: Aug 02, 2004
Posts: 2



(Msg. 7) Posted: Wed Aug 20, 2003 10:37 pm
Post subject: Re: k7s5a boot problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
RonS <ronsteinerNO.RemoveThis@SPAMtds.net> wrote:
  >>
 >A great resource:
 >http://pub140.ezboard.com/bk7s5amotherboardforum

Thanks, and now I have fixed by 2200XP being recognised as a 1500 by
changing the BUS/Memor speed from 100/100 to 133/133.

But, not fixed my USB problem of IR dongle not working properly, it
seems to half connect to my phone, but disconnects straight away.
--
JohnPerry.RemoveThis@redoak.co.ukNOSPAM (delete NOSPAM)
<a style='text-decoration: underline;' href="http://www.redoak.co.uk" target="_blank">www.redoak.co.uk</a> <a style='text-decoration: underline;' href="http://www.eze-buy.co.uk" target="_blank">www.eze-buy.co.uk</a><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: k7s5a boot problem 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
ECS K7S5A Version 3.1 BIOS Upgrade problem - I bought this MB around December 2001. The Version is assumed to be V3.1 (printed on top LHS corner). I downloaded the newest BIOS and AMINF333.exe. When run under DOS, an error is encountered as follows: Chipset Type - SiS735 Flash Part - Winbond..

K7S5A+AMD XP 2400 - I'm the owner of a K7S5A (version 3.1a). I recently purchased an AMD XP proccessor at 2400 Mhz with 266 FSB. The motherboard supports SDRAM(133 Mhz) & DDRAM(266 Mhz). Until now I used a Kingston 512 MB SDRAM 133 Mhz and Direct-X showed that an AMD XP...

What fsb to run 2600+ 333 cpu at in K7S5A Pro? - I've just bough a K7S5A Pro mobo with AMD 2600+ cpu. I've currently got the bios set at 133/133, but found that I can have it set to 166/133. That sounds like it should work, but I've read some posts which say that you can't run the 333 FSB 2600+ in thi...

K7S5A Pro, DDR and W2K Pro - I put together a new system with a Duron 1.1, a K7S5A Pro and one stick of 256MB PC2100. Nothing but problems. Finally found an old 32MB stick of PC133 and swapped it for the DDR. Problems vanished. So I bummed a 128MB PC133 stick from my cousin for a..

k7s5a pro - I bought a k7s5a pro last month and it is working fine. The motherboard manual mentions an onboard modem and a second serial port. Can someone tell me where the connections are on the motherboard?
   Hardware Problem Solving Community! (Home) -> Elitegroup All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]