k7vta3.1 bios 3.0d no usb 2.0

Hi
I have the k7vta3 with bios 3.0d.
I can't get the usb 2.0 to work 98se or xp pro does not register it. I cant
find anything in the to tweak bios exept usb all enable (usb port 1 enable 2
enable or all disabled)
When i take anything but all enabled a port or both dissaper.
How do i get 2.0 to work(the mb has usb 2.0)
Tried everythinhg from www.usbman.com installed all the updates for xp (and
tried with ecs usb2.0 driver and without)
But the problem is the usb 2.0 is not seen anywere(when i look in usb
controller all i see is two usb-rodhubs and two via rev 5 or never uiversal
hostcontrollers.
Please help www.Ecs.com does not reply my mail.
Kind regards jakob

USB 2.0 is optional on this motherboard. Are you absolutely sure your
motherboard has it? I think the chip that provides USB 2.0 is a VIA
VT6202. Do you physically see this chip?

Mike

"Jakob Kjelds" <gf DeleteThis @exo.dk> wrote in message
news:40029a82$0$17596$ba624c82@nntp01.dk.telia.net...
 > Hi
 > I have the k7vta3 with bios 3.0d.
 > I can't get the usb 2.0 to work 98se or xp pro does not register it. I
cant
 > find anything in the to tweak bios exept usb all enable (usb port 1 enable
2
 > enable or all disabled)
 > When i take anything but all enabled a port or both dissaper.
 > How do i get 2.0 to work(the mb has usb 2.0)
 > Tried everythinhg from <a style='text-decoration: underline;' href="http://www.usbman.com" target="_blank">www.usbman.com</a> installed all the updates for xp
(and
 > tried with ecs usb2.0 driver and without)
 > But the problem is the usb 2.0 is not seen anywere(when i look in usb
 > controller all i see is two usb-rodhubs and two via rev 5 or never
uiversal
 > hostcontrollers.
 > Please help <a style='text-decoration: underline;' href="http://www.Ecs.com" target="_blank">www.Ecs.com</a> does not reply my mail.
 > Kind regards jakob
 >
 ><!-- ~MESSAGE_AFTER~ -->