 |
|
|
|
Next: Linux on Abit
|
| Author |
Message |
External
Since: Dec 23, 2004
Posts: 2
|
(Msg. 1) Posted: Thu Dec 23, 2004 5:35 pm
Post subject: kt7a raid and usb 2.0
Archived from groups: alt>comp>periphs>mainboard>abit (more info?)
|
|
|
|
|
| Back to top |
|
 | |
External
Since: Oct 14, 2004
Posts: 235
|
(Msg. 2) Posted: Thu Dec 23, 2004 7:35 pm
Post subject: Re: kt7a raid and usb 2.0 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"ARR" wrote in message...
> Does the kt7a raid mb support usb 2.0?
It will if you buy it a PCI USB 2.0 add-in card for Christmas! 
--
Richard Hopkins
Cardiff, Wales, United Kingdom
(replace .nospam with .com in reply address)
The UK's leading technology reseller <a style='text-decoration: underline;' href="http://www.dabs.com" target="_blank">www.dabs.com</a>
Get the most out of your digital photos <a style='text-decoration: underline;' href="http://www.dabsxpose.com" target="_blank">www.dabsxpose.com</a><!-- ~MESSAGE_AFTER~ --> |
|
| Back to top |
|
| |
External
Since: Dec 23, 2004
Posts: 2
|
(Msg. 3) Posted: Fri Dec 24, 2004 12:35 am
Post subject: Re: kt7a raid and usb 2.0 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thanks!! Thats what I thought, but wanted to be sure...
Richard Hopkins wrote:
> "ARR" wrote in message...
>
>> Does the kt7a raid mb support usb 2.0?
>
>
> It will if you buy it a PCI USB 2.0 add-in card for Christmas! <!-- ~MESSAGE_AFTER~ --> >> Stay informed about: kt7a raid and usb 2.0 |
|
| Back to top |
|
| |
External
Since: Dec 25, 2004
Posts: 1
|
(Msg. 4) Posted: Fri Dec 24, 2004 8:35 pm
Post subject: Re: kt7a raid and usb 2.0 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
be careful. The pci Usb 2.0 card must have VIA chip ,not NEC.Works on this
motherboard better!
"ARR" <jhallenu.RemoveThis@nospam.ix.netcom.com> wrote in message
news:pSMyd.7942$9j5.729@newsread3.news.pas.earthlink.net...
> Thanks!! Thats what I thought, but wanted to be sure...
>
>
>
>
>
>
>
>
>
>
>
>
>
> Richard Hopkins wrote:
>> "ARR" wrote in message...
>>
>>> Does the kt7a raid mb support usb 2.0?
>>
>>
>> It will if you buy it a PCI USB 2.0 add-in card for Christmas! <!-- ~MESSAGE_AFTER~ --> >> Stay informed about: kt7a raid and usb 2.0 |
|
| Back to top |
|
| |
External
Since: Jul 27, 2004
Posts: 19
|
(Msg. 5) Posted: Mon Dec 27, 2004 10:35 am
Post subject: Re: kt7a raid and usb 2.0 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
i'm using a pci usb 2.0 card with a nec chip since years.
without any problem.
s schrieb:
> be careful. The pci Usb 2.0 card must have VIA chip ,not NEC.Works on this
> motherboard better!
> "ARR" <jhallenu.DeleteThis@nospam.ix.netcom.com> wrote in message
> news:pSMyd.7942$9j5.729@newsread3.news.pas.earthlink.net...
>
>>Thanks!! Thats what I thought, but wanted to be sure...
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>Richard Hopkins wrote:
>>
>>>"ARR" wrote in message...
>>>
>>>
>>>>Does the kt7a raid mb support usb 2.0?
>>>
>>>
>>>It will if you buy it a PCI USB 2.0 add-in card for Christmas!
>
>
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: kt7a raid and usb 2.0 |
|
| Back to top |
|
| |
External
Since: Dec 27, 2004
Posts: 13
|
(Msg. 6) Posted: Mon Dec 27, 2004 6:35 pm
Post subject: Re: kt7a raid and usb 2.0 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Which PCI slot did you put yours into, Erik. I have tried a couple of
USB2.0 cards, one of them an NEC chip (the other a CompUSA Ali), and neither
worked. Mine was in the second PCI slot from the AGP ( -- is that 5 or 2,
I don't know).
I finally gave up and just live with USB 1.1 and a bunch of hubs.
Erik Hayn wrote:
| | i'm using a pci usb 2.0 card with a nec chip since years.
| | without any problem.
| |
| | s schrieb:
| | | be careful. The pci Usb 2.0 card must have VIA chip ,not
| | | NEC.Works on this motherboard better!
| | | "ARR" <jhallenu.RemoveThis@nospam.ix.netcom.com> wrote in message
| | | news:pSMyd.7942$9j5.729@newsread3.news.pas.earthlink.net...
| | |
| | | | Thanks!! Thats what I thought, but wanted to be sure...
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | Richard Hopkins wrote:
| | | |
| | | | | "ARR" wrote in message...
| | | | |
| | | | |
| | | | | | Does the kt7a raid mb support usb 2.0?
| | | | |
| | | | |
| | | | | It will if you buy it a PCI USB 2.0 add-in card for
| | | | | Christmas! >> Stay informed about: kt7a raid and usb 2.0 |
|
| Back to top |
|
| |
External
Since: Jan 01, 2004
Posts: 25
|
(Msg. 7) Posted: Tue Dec 28, 2004 2:03 am
Post subject: Re: kt7a raid and usb 2.0 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I got here a q-tec (with a via chip) usb2.0 card with would'n work at usb2.0
speed.
> Which PCI slot did you put yours into, Erik. I have tried a couple of
> USB2.0 cards, one of them an NEC chip (the other a CompUSA Ali), and
> neither worked. Mine was in the second PCI slot from the AGP ( -- is
> that 5 or 2, I don't know).
>
> I finally gave up and just live with USB 1.1 and a bunch of hubs.
>
> Erik Hayn wrote:
> | | i'm using a pci usb 2.0 card with a nec chip since years.
> | | without any problem.
> | |
> | | s schrieb:
> | | | be careful. The pci Usb 2.0 card must have VIA chip ,not
> | | | NEC.Works on this motherboard better!
> | | | "ARR" <jhallenu.DeleteThis@nospam.ix.netcom.com> wrote in message
> | | | news:pSMyd.7942$9j5.729@newsread3.news.pas.earthlink.net...
> | | |
> | | | | Thanks!! Thats what I thought, but wanted to be sure...
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | | Richard Hopkins wrote:
> | | | |
> | | | | | "ARR" wrote in message...
> | | | | |
> | | | | |
> | | | | | | Does the kt7a raid mb support usb 2.0?
> | | | | |
> | | | | |
> | | | | | It will if you buy it a PCI USB 2.0 add-in card for
> | | | | | Christmas!
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: kt7a raid and usb 2.0 |
|
| Back to top |
|
| |
External
Since: Jul 27, 2004
Posts: 19
|
(Msg. 8) Posted: Tue Dec 28, 2004 9:37 am
Post subject: Re: kt7a raid and usb 2.0 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
it's in the fifth pci-slot (from top, respectivly the second from bottom).
Exray schrieb:
> Which PCI slot did you put yours into, Erik. I have tried a couple of
> USB2.0 cards, one of them an NEC chip (the other a CompUSA Ali), and neither
> worked. Mine was in the second PCI slot from the AGP ( -- is that 5 or 2,
> I don't know).
>
> I finally gave up and just live with USB 1.1 and a bunch of hubs.
>
> Erik Hayn wrote:
> | | i'm using a pci usb 2.0 card with a nec chip since years.
> | | without any problem.
> | |
> | | s schrieb:
> | | | be careful. The pci Usb 2.0 card must have VIA chip ,not
> | | | NEC.Works on this motherboard better!
> | | | "ARR" <jhallenu.DeleteThis@nospam.ix.netcom.com> wrote in message
> | | | news:pSMyd.7942$9j5.729@newsread3.news.pas.earthlink.net...
> | | |
> | | | | Thanks!! Thats what I thought, but wanted to be sure...
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | | Richard Hopkins wrote:
> | | | |
> | | | | | "ARR" wrote in message...
> | | | | |
> | | | | |
> | | | | | | Does the kt7a raid mb support usb 2.0?
> | | | | |
> | | | | |
> | | | | | It will if you buy it a PCI USB 2.0 add-in card for
> | | | | | Christmas!
>
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: kt7a raid and usb 2.0 |
|
| Back to top |
|
| |
External
Since: Dec 27, 2004
Posts: 13
|
(Msg. 9) Posted: Tue Dec 28, 2004 4:32 pm
Post subject: Re: kt7a raid and usb 2.0 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thanks. Next time I rip apart the computer (this week...vacation time....)
I'll shove the card in there and see if that makes a difference.
Erik Hayn wrote:
| | it's in the fifth pci-slot (from top, respectivly the second from
| | bottom).
| |
| | Exray schrieb:
| | | Which PCI slot did you put yours into, Erik. I have tried a
| | | couple of USB2.0 cards, one of them an NEC chip (the other a
| | | CompUSA Ali), and neither worked. Mine was in the second PCI
| | | slot from the AGP ( -- is that 5 or 2, I don't know).
| | |
| | | I finally gave up and just live with USB 1.1 and a bunch of hubs.
| | |
| | | Erik Hayn wrote:
| | | | | i'm using a pci usb 2.0 card with a nec chip since years.
| | | | | without any problem.
| | | | |
| | | | | s schrieb:
| | | | | | be careful. The pci Usb 2.0 card must have VIA chip ,not
| | | | | | NEC.Works on this motherboard better!
| | | | | | "ARR" <jhallenu.TakeThisOut@nospam.ix.netcom.com> wrote in message
| | | | | | news:pSMyd.7942$9j5.729@newsread3.news.pas.earthlink.net...
| | | | | |
| | | | | | | Thanks!! Thats what I thought, but wanted to be sure...
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | Richard Hopkins wrote:
| | | | | | |
| | | | | | | | "ARR" wrote in message...
| | | | | | | |
| | | | | | | |
| | | | | | | | | Does the kt7a raid mb support usb 2.0?
| | | | | | | |
| | | | | | | |
| | | | | | | | It will if you buy it a PCI USB 2.0 add-in card for
| | | | | | | | Christmas! >> Stay informed about: kt7a raid and usb 2.0 |
|
| Back to top |
|
| |
External
Since: Dec 29, 2004
Posts: 4
|
(Msg. 10) Posted: Tue Dec 28, 2004 10:38 pm
Post subject: Re: kt7a raid and usb 2.0 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I bought a Ali and when I put it in, winxp finds it, but the system
slows to a dead snails pace. I had to reboot. Then, it causes the
system to not fully load. I had to remove it to get the system back
running normally. Any suggestions?
JH
Exray wrote:
> Which PCI slot did you put yours into, Erik. I have tried a couple of
> USB2.0 cards, one of them an NEC chip (the other a CompUSA Ali), and neither
> worked. Mine was in the second PCI slot from the AGP ( -- is that 5 or 2,
> I don't know).
>
> I finally gave up and just live with USB 1.1 and a bunch of hubs.
>
> Erik Hayn wrote:
> | | i'm using a pci usb 2.0 card with a nec chip since years.
> | | without any problem.
> | |
> | | s schrieb:
> | | | be careful. The pci Usb 2.0 card must have VIA chip ,not
> | | | NEC.Works on this motherboard better!
> | | | "ARR" <jhallenu.RemoveThis@nospam.ix.netcom.com> wrote in message
> | | | news:pSMyd.7942$9j5.729@newsread3.news.pas.earthlink.net...
> | | |
> | | | | Thanks!! Thats what I thought, but wanted to be sure...
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | |
> | | | | Richard Hopkins wrote:
> | | | |
> | | | | | "ARR" wrote in message...
> | | | | |
> | | | | |
> | | | | | | Does the kt7a raid mb support usb 2.0?
> | | | | |
> | | | | |
> | | | | | It will if you buy it a PCI USB 2.0 add-in card for
> | | | | | Christmas!
>
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: kt7a raid and usb 2.0 |
|
| Back to top |
|
| |
External
Since: Dec 18, 2003
Posts: 28
|
(Msg. 11) Posted: Wed Dec 29, 2004 1:04 am
Post subject: Re: Re: kt7a raid and usb 2.0 [Login to view extended thread Info.]
Imported from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Dec 29, 2004
Posts: 4
|
(Msg. 12) Posted: Wed Dec 29, 2004 1:12 am
Post subject: Re: kt7a raid and usb 2.0 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Brian,
I had it installed in the second slot from the end. (I am looking at the
mb the agp slot and the processor is on the right and the bios chip and
cmos battery is to the left.
Brian Brunner wrote:
> On Tue, 28 Dec 2004, ARR wrote:
>
>
>>>I bought a Ali and when I put it in,
>
>
> Which slot?
>
> What are the other slots occupied with?
>
>
>>>winxp finds it, but the system
>>>slows to a dead snails pace. I had to reboot. Then, it causes the
>>>system to not fully load. I had to remove it to get the system back
>>>running normally. Any suggestions?
>>>
>>>JH
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>Exray wrote:
>>>
>>>>Which PCI slot did you put yours into, Erik. I have tried a couple of
>>>>USB2.0 cards, one of them an NEC chip (the other a CompUSA Ali), and neither
>>>>worked. Mine was in the second PCI slot from the AGP ( -- is that 5 or 2,
>>>>I don't know).
>>>>
>>>>I finally gave up and just live with USB 1.1 and a bunch of hubs.
>>>>
>>>>Erik Hayn wrote:
>>>>| | i'm using a pci usb 2.0 card with a nec chip since years.
>>>>| | without any problem.
>>>>| |
>>>>| | s schrieb:
>>>>| | | be careful. The pci Usb 2.0 card must have VIA chip ,not
>>>>| | | NEC.Works on this motherboard better!
>>>>| | | "ARR" <jhallenu.DeleteThis@nospam.ix.netcom.com> wrote in message
>>>>| | | news:pSMyd.7942$9j5.729@newsread3.news.pas.earthlink.net...
>>>>| | |
>>>>| | | | Thanks!! Thats what I thought, but wanted to be sure...
>>>>| | | |
>>>>| | | |
>>>>| | | |
>>>>| | | |
>>>>| | | |
>>>>| | | |
>>>>| | | |
>>>>| | | |
>>>>| | | |
>>>>| | | |
>>>>| | | |
>>>>| | | |
>>>>| | | |
>>>>| | | | Richard Hopkins wrote:
>>>>| | | |
>>>>| | | | | "ARR" wrote in message...
>>>>| | | | |
>>>>| | | | |
>>>>| | | | | | Does the kt7a raid mb support usb 2.0?
>>>>| | | | |
>>>>| | | | |
>>>>| | | | | It will if you buy it a PCI USB 2.0 add-in card for
>>>>| | | | | Christmas!
>>>>
>>>>
>
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: kt7a raid and usb 2.0 |
|
| Back to top |
|
| |
External
Since: Feb 06, 2004
Posts: 120
|
(Msg. 13) Posted: Thu Dec 30, 2004 7:25 am
Post subject: Re: kt7a raid and usb 2.0 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Check your board's PCI slot shares. Some PCI boards don't like sharing INTs
(A-D) with others. Maybe you could also assign an IRQ to it alone, ie. if
you don't use serial ports you could give it IRQ 3, etc.
Dave
"Exray" <exray DeleteThis @amexol.net> wrote in message
news:AUfAd.274206$V41.251799@attbi_s52...
> Thanks. Next time I rip apart the computer (this week...vacation
> time....) I'll shove the card in there and see if that makes a difference.
>
> Erik Hayn wrote:
> | | it's in the fifth pci-slot (from top, respectivly the second from
> | | bottom).
> | |
> | | Exray schrieb:
> | | | Which PCI slot did you put yours into, Erik. I have tried a
> | | | couple of USB2.0 cards, one of them an NEC chip (the other a
> | | | CompUSA Ali), and neither worked. Mine was in the second PCI
> | | | slot from the AGP ( -- is that 5 or 2, I don't know).
> | | |
> | | | I finally gave up and just live with USB 1.1 and a bunch of hubs.
> | | |
> | | | Erik Hayn wrote:
> | | | | | i'm using a pci usb 2.0 card with a nec chip since years.
> | | | | | without any problem.
> | | | | |
> | | | | | s schrieb:
> | | | | | | be careful. The pci Usb 2.0 card must have VIA chip ,not
> | | | | | | NEC.Works on this motherboard better!
> | | | | | | "ARR" <jhallenu DeleteThis @nospam.ix.netcom.com> wrote in message
> | | | | | | news:pSMyd.7942$9j5.729@newsread3.news.pas.earthlink.net...
> | | | | | |
> | | | | | | | Thanks!! Thats what I thought, but wanted to be sure...
> | | | | | | |
> | | | | | | |
> | | | | | | |
> | | | | | | |
> | | | | | | |
> | | | | | | |
> | | | | | | |
> | | | | | | |
> | | | | | | |
> | | | | | | |
> | | | | | | |
> | | | | | | |
> | | | | | | |
> | | | | | | | Richard Hopkins wrote:
> | | | | | | |
> | | | | | | | | "ARR" wrote in message...
> | | | | | | | |
> | | | | | | | |
> | | | | | | | | | Does the kt7a raid mb support usb 2.0?
> | | | | | | | |
> | | | | | | | |
> | | | | | | | | It will if you buy it a PCI USB 2.0 add-in card for
> | | | | | | | | Christmas!
><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: kt7a raid and usb 2.0 |
|
| Back to top |
|
| |
| Related Topics: | KT7A-RAID no BIOS - I have a problem that I'm not sure there is an answer to but I thought I would ask anyway. I can not enter the BIOS setup any longer. When I boot, I get the message that the CPU settings are unworkable press F! to continue or 'DEL' to fix. When I pres...
KT7A-Raid Duron ? - What's the fastest Duron this board will accept without crashes, hanging etc? TIA Redman
KT7A-Raid Board V1.0 - I was going to add a DVD Burner to my system and was hoping to get some input on which IDE controller I should have everything hooked to. At this time I have (1) Hard drive on IDE1 Master, (1) Hard drive on IDE2 Master, (1) CD-ROM on Raid IDE1 Master,...
KT7a-RAID - max possible HD capacity - Hi ! 1. Is there any problem to connect two 120 GB HDs as RAID 0 to my KT7A RAID V1.1 motherboard? Is there for example a 128 GB limit or something else. I have the latest BIOS A9 installed. 2. Is it also possible to connect two different (manufacture...
Max CPU at KT7A Raid can handle? - Hi everyone, I bought a KT7A-Raid board a little over two years ago. I've got an Athlon 900 Mhz CPU in it, and was thinking of upgrading. How "far" up the AMD food chain can I go, in terms of CPU speed and type? I upgraded the bios abou... |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
