Hi Heinz
Yes I posted this first then read your post
I'm running official mp's but over spec that the mb supports as you
state - although these cpus actually consume less power than the
officially supported 1900's
Well its working again - 2-3 boots since last night and its fine...
If it did anything at all, I did give the heat sinks a little shake
and used some compressed air...
for now its working, good to know the 1.04 will work if I need to go
back to it
cheers
On Mon, 15 Sep 2003 19:48:36 +0200, "heinz" <heinzv DeleteThis @gmx.at.NOSPAM>
wrotf:
>Hi again rabid,
>
>sorry this was a misunderstanding, it looks like your post came after mine
>(I though your's was earlier).
>However I gave my answer on that - just try to go one version down (1.05 to
>1.04) and give it a try. I got rid of that immedialtly and this works now
>for a couple of month.
>
>If I understand you post right, you're using real MP's ? And it gets worser
>over time ? Very strange. Unfortunatly Tyan will not support us because they
>officially only support MP's up to 1900.
>
>good luck with the V1.04
>
>"rabid" <spamrclarke DeleteThis @idirect.com> schrieb im Newsbeitrag
>news:5udamvoi0msat0qf146nkh1pggardpdetl@4ax.com...
>> Running 2 x 2400 mp's on a tyan tiger for almost a year without
>> incident...Saw the very occasional( 3 times ? ) "non matching cpu's,
>> press f1 to continue in unsupported mode"...
>> Well now I'm getting that a lot. I did a complete reinstall of windows
>> 2 weeks ago but am now getting the error several times in a row..
>> 1.5 bios
>>
>> not much info at 2cpu on this
>> obviously it runs with only 1 cpu in unsupported mode
>>
>> thanks
>>
><!-- ~MESSAGE_AFTER~ -->
>> Stay informed about: NON matching cpu problem 
FAQ
Profile
Private Messages
Log in
