urgent question: moving a raid 5 array from one server to ..

We just had our old sc1420 dell server die.. with a series of beeps on
bootup.. (i cant determine the exact order of the 6 beeps, but it
appears to be system board failure)..

Problem is.. we have tons of data (relatively speaking) on this server
in a raid 5 array.. the size being about 250gb of data..

I'm guessing the answer is no.. but .. we have a 3ware card in this
system and a different model 3ware in another server.. i was hoping i
could just connect the drives to this other controller and they would
show up.. but i'm guessing not?

I'm not sure how to go about moving this data.. i'm guessing i'd need
to move the card from the dead server to another as well?

Thanks for any thoughts.

"markm75" <markm75c.TakeThisOut@msn.com> wrote in message
news:317e362b-a977-4229-90a1-d96b6c625777@e6g2000prf.googlegroups.com...
> We just had our old sc1420 dell server die.. with a series of beeps on
> bootup.. (i cant determine the exact order of the 6 beeps, but it
> appears to be system board failure)..
>
> Problem is.. we have tons of data (relatively speaking) on this server
> in a raid 5 array.. the size being about 250gb of data..
>
> I'm guessing the answer is no.. but .. we have a 3ware card in this
> system and a different model 3ware in another server.. i was hoping i
> could just connect the drives to this other controller and they would
> show up.. but i'm guessing not?
>
> I'm not sure how to go about moving this data.. i'm guessing i'd need
> to move the card from the dead server to another as well?
>
> Thanks for any thoughts.

The correct answer is to restore your latest backup to the new server!
You can try moving the card and drives to the new server, but if hardware is
too different the OS may fail to boot.

Mike.