Getting network to work with Zonealarm

"anthony fidler" <anthony.fidler RemoveThis @ntlworld.com> wrote in message
news:%0tgc.436$Gq3.31@newsfe1-win...
 > Can only get my home network to work if I turn off my zonealarm firewall.
 > Have only two pc`s connected by ethernet cable, any suggestions please?
 >
 >

You need to set the zones for it to work.

Under firewall you have 2 tabs Main and Zone, there should be an entry for
your internet connection and one that shows your network cards ip address.
Set the network card to trusted and you should then be able to access each
pc's shared folders

Mark<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Getting network to work with Zonealarm 

"mark" <neo_cerberus RemoveThis @SoftHome.net> wrote in message
news:41Vgc.184$C24.165@newsfe1-win...
 >
 > "anthony fidler" <anthony.fidler RemoveThis @ntlworld.com> wrote in message
 > news:%0tgc.436$Gq3.31@newsfe1-win...
  > > Can only get my home network to work if I turn off my zonealarm
firewall.
  > > Have only two pc`s connected by ethernet cable, any suggestions please?
  > >
  > >
 >
 > You need to set the zones for it to work.
 >
 > Under firewall you have 2 tabs Main and Zone, there should be an entry for
 > your internet connection and one that shows your network cards ip address.
 > Set the network card to trusted and you should then be able to access each
 > pc's shared folders
 >
 > Mark
 >
 >

You also need to have the paid for version of Zonealarm, the free
donwloadable version doesn`t support networking. I tried. IIRC theres
some info on this on the zonealarm website.

Pete<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Getting network to work with Zonealarm 

"Pete" <petey.bob.DeleteThis@spamvirgin.net> wrote in message
news:dNhhc.223$tB3.102@newsfe1-gui.server.ntli.net...
 >
 > "mark" <neo_cerberus.DeleteThis@SoftHome.net> wrote in message
 > news:41Vgc.184$C24.165@newsfe1-win...
  > >
  > > "anthony fidler" <anthony.fidler.DeleteThis@ntlworld.com> wrote in message
  > > news:%0tgc.436$Gq3.31@newsfe1-win...
   > > > Can only get my home network to work if I turn off my zonealarm
 > firewall.
   > > > Have only two pc`s connected by ethernet cable, any suggestions
please?
   > > >
   > > >
  > >
  > > You need to set the zones for it to work.
  > >
  > > Under firewall you have 2 tabs Main and Zone, there should be an entry
for
  > > your internet connection and one that shows your network cards ip
address.
  > > Set the network card to trusted and you should then be able to access
each
  > > pc's shared folders
  > >
  > > Mark
  > >
  > >
 >
 > You also need to have the paid for version of Zonealarm, the free
 > donwloadable version doesn`t support networking. I tried. IIRC theres
 > some info on this on the zonealarm website.
 >
 > Pete
 >
 >

Not so. The free version supports trusted zones.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Getting network to work with Zonealarm