omega drivers

"Jeff McNulty" <bilyzoom.RemoveThis@gte.net> wrote in message
news:oTwUc.7126$og.86@nwrddc04.gnilink.net...
 > just installed omega drivers from omegadriver.net and cannot get radlinker
 > to lock in overclocking settings. I have enable clock settings checked and
 > can adjust the clock speed but the apply button is greyed out. BTW I have
a
 > ati 9600xt. I uninstalled the cat 4.8 drivers and ran nasty file remover.
 > The omega drivers gave me a 300 point decrease on 3d mark 2003 than the
cat
 > 4.8
 >
 >

When you click on the "Set" button, a pop-up should
appear that says it is successfully clocked at ...; do you
see this pop-up?

Make sure you have any "pop-up" and or registry
change, blocking software disabled/ turned off.

Luck;
Ken<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: omega drivers 

I enabled clock settings moved the sliders clicked set dialog box came up
saying that it over clocked but the apply box is greyed out. So I clicked
OK, at next boot it is back to default settings. I can get ati's overdrive
to clock at 526mhz. I have also tried radlinker with overdrive enabled and
disabled.
"Jeff McNulty" <bilyzoom.DeleteThis@gte.net> wrote in message
news:oTwUc.7126$og.86@nwrddc04.gnilink.net...
 > just installed omega drivers from omegadriver.net and cannot get radlinker
 > to lock in overclocking settings. I have enable clock settings checked and
 > can adjust the clock speed but the apply button is greyed out. BTW I have
a
 > ati 9600xt. I uninstalled the cat 4.8 drivers and ran nasty file remover.
 > The omega drivers gave me a 300 point decrease on 3d mark 2003 than the
cat
 > 4.8
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: omega drivers 

On Wed, 18 Aug 2004 04:40:50 -0500, "Ken Maltby" <kmaltby.DeleteThis@sbcglobal.net> wrote:

 >
 >"Jeff McNulty" <bilyzoom.DeleteThis@gte.net> wrote in message
 >news:oTwUc.7126$og.86@nwrddc04.gnilink.net...
  >> just installed omega drivers from omegadriver.net and cannot get radlinker
  >> to lock in overclocking settings. I have enable clock settings checked and
  >> can adjust the clock speed but the apply button is greyed out. BTW I have
 >a
  >> ati 9600xt. I uninstalled the cat 4.8 drivers and ran nasty file remover.
  >> The omega drivers gave me a 300 point decrease on 3d mark 2003 than the
 >cat
  >> 4.8
  >>
  >>
 >
 > When you click on the "Set" button, a pop-up should
 >appear that says it is successfully clocked at ...; do you
 >see this pop-up?
 >
 > Make sure you have any "pop-up" and or registry
 >change, blocking software disabled/ turned off.
 >
 >Luck;
 > Ken
 >
 >
omega driver download 4.4 version.
<a style='text-decoration: underline;' href="http://www.mytweakers.net/meuktracker/5905" target="_blank">http://www.mytweakers.net/meuktracker/5905</a>

i think whit the 4.4 everything is sharper vs other version it's been said here and i think it
true... a will be back to that version soon to see.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: omega drivers 

On Wed, 18 Aug 2004 04:40:50 -0500, "Ken Maltby" <kmaltby.TakeThisOut@sbcglobal.net> wrote:

 >
 >"Jeff McNulty" <bilyzoom.TakeThisOut@gte.net> wrote in message
 >news:oTwUc.7126$og.86@nwrddc04.gnilink.net...
  >> just installed omega drivers from omegadriver.net and cannot get radlinker
  >> to lock in overclocking settings. I have enable clock settings checked and
  >> can adjust the clock speed but the apply button is greyed out. BTW I have
 >a
  >> ati 9600xt. I uninstalled the cat 4.8 drivers and ran nasty file remover.
  >> The omega drivers gave me a 300 point decrease on 3d mark 2003 than the
 >cat
  >> 4.8
  >>
  >>
 >
 > When you click on the "Set" button, a pop-up should
 >appear that says it is successfully clocked at ...; do you
 >see this pop-up?
 >
 > Make sure you have any "pop-up" and or registry
 >change, blocking software disabled/ turned off.
 >
 >Luck;
 > Ken
 >
 >


i forgot to post that link to
<a style='text-decoration: underline;' href="http://www.driverheaven.net/downloads/index4.htm" target="_blank">http://www.driverheaven.net/downloads/index4.htm</a>

for all the version fx and ati omega version.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: omega drivers 

"Jeff McNulty" <bilyzoom DeleteThis @gte.net> wrote
 > just installed omega drivers from omegadriver.net and cannot get radlinker
 > to lock in overclocking settings.

Well I'm wondering why Radlinker-shortcuts don't have any kind
of effect in games I set them for. For example, no anti-aliasing even
if I enable it for both DirectX and OpenGL from the shortcut
properties and AA is set to "Application preference" from the
drivers 3D-settings. It keeps my clock settings, tough.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: omega drivers 

"jeff" <jmcnulty%rambusiness.com> wrote:
 >I enabled clock settings moved the sliders clicked set dialog box came up
 >saying that it over clocked but the apply box is greyed out. So I clicked
 >OK, at next boot it is back to default settings. I can get ati's overdrive
 >to clock at 526mhz. I have also tried radlinker with overdrive enabled and
 >disabled.

Did you press "Use Current"-button after set-button ? Otherwise settings
don't stay after reboot.
--
----------------------------------
Matti Wartiainen.
Kouvola.Suomi.Finland.
-----------------------------------<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: omega drivers 

"Matti Wartiainen" <matti.wartiainen DeleteThis @kymp.net> wrote in message
news:gnf7i0h043pm41eouku6u482952eg54tnt@4ax.com...
 > "jeff" <jmcnulty%rambusiness.com> wrote:
  > >I enabled clock settings moved the sliders clicked set dialog box came up
  > >saying that it over clocked but the apply box is greyed out. So I clicked
  > >OK, at next boot it is back to default settings. I can get ati's
overdrive
  > >to clock at 526mhz. I have also tried radlinker with overdrive enabled
and
  > >disabled.
 >
 > Did you press "Use Current"-button after set-button ? Otherwise settings
 > don't stay after reboot.
 > --
 > ----------------------------------
 > Matti Wartiainen.
 > Kouvola.Suomi.Finland.
 > -----------------------------------

Part of my first response to the OP:

"You need to click on the "Set" button, then the "Apply". You may
also want to set the startup speed ( again after you have clicked the
"Set" button, but before the "Apply" button.)
/Ken"

I think you may have said it better.

Luck;
Ken<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: omega drivers 

'use current' button did the trick

thanks


"Jeff McNulty" <bilyzoom DeleteThis @gte.net> wrote in message
news:oTwUc.7126$og.86@nwrddc04.gnilink.net...
 > just installed omega drivers from omegadriver.net and cannot get radlinker
 > to lock in overclocking settings. I have enable clock settings checked and
 > can adjust the clock speed but the apply button is greyed out. BTW I have
a
 > ati 9600xt. I uninstalled the cat 4.8 drivers and ran nasty file remover.
 > The omega drivers gave me a 300 point decrease on 3d mark 2003 than the
cat
 > 4.8
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: omega drivers