4 pin ATX power supply connector question

"Graham W" <graham.DeleteThis@his.com.puter.INVALID> wrote in message
news:4687d896$0$8744$ed2619ec@ptn-nntp-reader02.plus.net...
>
>
> Lee MacMillan wrote:
> > In the process of swapping out my 8KHA+ for an 8RDA3+. The latter has
> > the extra 4 pin power supply connector. The manual says the 4 pins are
> > 2 grounds and 2 12v but my new power supply connector has 1 each of
> > black, red, orange & yellow. Anyone know if the ATX spec has changed
> > since this mobo was made? Am I SOL unless I get a different power
> > supply?
>
> That might be simplest thing to do, Lee. New boards come with a 24 pin
> power socket but the PSU makers usually use a connector that has
> 20 + 4 so that a bit of it can be unclipped and used seperately.
>
> HTH
> --
> Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics Tutorial
> WIMBORNE http://www.wessex-astro.org.uk/ Wessex Astro Society's Website
> Dorset UK Info, Meeting Dates, Sites & Maps

I checked the PSU in my other machine and it has the same 4 color 4 pin
connector so I'm thinking this mobo may be the odd man out so to speak. The
PSU has a 6 pin PCI-Express connector that is 3 grounds and 3 12v lines. I
wonder if I could use 4 pins of that connector to make it work. Or maybe
just see if it will fire up without the 4 pin connector. What do you think?
 >> Stay informed about: 4 pin ATX power supply connector question 

"Graham W" <graham.TakeThisOut@his.com.puter.INVALID> wrote in message
news:4687d896$0$8744$ed2619ec@ptn-nntp-reader02.plus.net...
>
>
> Lee MacMillan wrote:
> > In the process of swapping out my 8KHA+ for an 8RDA3+. The latter has
> > the extra 4 pin power supply connector. The manual says the 4 pins are
> > 2 grounds and 2 12v but my new power supply connector has 1 each of
> > black, red, orange & yellow. Anyone know if the ATX spec has changed
> > since this mobo was made? Am I SOL unless I get a different power
> > supply?
>
> That might be simplest thing to do, Lee. New boards come with a 24 pin
> power socket but the PSU makers usually use a connector that has
> 20 + 4 so that a bit of it can be unclipped and used seperately.
>
> HTH
> --
> Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics Tutorial
> WIMBORNE http://www.wessex-astro.org.uk/ Wessex Astro Society's Website
> Dorset UK Info, Meeting Dates, Sites & Maps
> Change 'news' to 'sewn' in my Reply address to avoid my spam filter.

I found the right connector. There were so many unused connectors bundled
together I just missed it the first time around. Plus it was confusing
since the other 4 pin connector was bundled with the 20 pin ATX connector.
 >> Stay informed about: 4 pin ATX power supply connector question 

Lee MacMillan wrote:
> "Graham W" <graham.TakeThisOut@his.com.puter.INVALID> wrote in message
> news:4687d896$0$8744$ed2619ec@ptn-nntp-reader02.plus.net...
>>
>>
>> Lee MacMillan wrote:
>>> In the process of swapping out my 8KHA+ for an 8RDA3+. The latter has
>>> the extra 4 pin power supply connector. The manual says the 4 pins
>>> are 2 grounds and 2 12v but my new power supply connector has 1 each
>>> of black, red, orange & yellow. Anyone know if the ATX spec has
>>> changed since this mobo was made? Am I SOL unless I get a different
>>> power supply?
>>
>> That might be simplest thing to do, Lee. New boards come with a 24 pin
>> power socket but the PSU makers usually use a connector that has
>> 20 + 4 so that a bit of it can be unclipped and used seperately.
>>
>> HTH
>> --
>> Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics
>> Tutorial WIMBORNE http://www.wessex-astro.org.uk/ Wessex Astro
>> Society's Website Dorset UK Info, Meeting Dates, Sites & Maps
>> Change 'news' to 'sewn' in my Reply address to avoid my spam filter.
>
> I found the right connector. There were so many unused connectors
> bundled together I just missed it the first time around. Plus it was
> confusing since the other 4 pin connector was bundled with the 20 pin
> ATX connector.

Good!

Have you made it go yet?


--
Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics Tutorial
WIMBORNE http://www.wessex-astro.org.uk/ Wessex Astro Society's Website
Dorset UK Info, Meeting Dates, Sites & Maps
Change 'news' to 'sewn' in my Reply address to avoid my spam filter.
 >> Stay informed about: 4 pin ATX power supply connector question 

"Graham W" <graham.DeleteThis@his.com.puter.INVALID> wrote in message
news:46880291$0$8747$ed2619ec@ptn-nntp-reader02.plus.net...
>
>
> Lee MacMillan wrote:
>> "Graham W" <graham.DeleteThis@his.com.puter.INVALID> wrote in message
>> news:4687d896$0$8744$ed2619ec@ptn-nntp-reader02.plus.net...
>>>
>>>
>>> Lee MacMillan wrote:
>>>> In the process of swapping out my 8KHA+ for an 8RDA3+. The latter has
>>>> the extra 4 pin power supply connector. The manual says the 4 pins
>>>> are 2 grounds and 2 12v but my new power supply connector has 1 each
>>>> of black, red, orange & yellow. Anyone know if the ATX spec has
>>>> changed since this mobo was made? Am I SOL unless I get a different
>>>> power supply?
>>>
>>> That might be simplest thing to do, Lee. New boards come with a 24 pin
>>> power socket but the PSU makers usually use a connector that has
>>> 20 + 4 so that a bit of it can be unclipped and used seperately.
>>>
>>> HTH
>>> --
>>> Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics
>>> Tutorial WIMBORNE http://www.wessex-astro.org.uk/ Wessex Astro
>>> Society's Website Dorset UK Info, Meeting Dates, Sites & Maps
>>> Change 'news' to 'sewn' in my Reply address to avoid my spam filter.
>>
>> I found the right connector. There were so many unused connectors
>> bundled together I just missed it the first time around. Plus it was
>> confusing since the other 4 pin connector was bundled with the 20 pin
>> ATX connector.
>
> Good!
>
> Have you made it go yet?
>
>
Yep, it's running right now with the Athlon 1800+ that was in the 8KHA+.
The 8RDA3+ with nForce 400 chipset is about 10% faster on the SuperPi
benchmark than the KT266A chipset. Tomorrow I will install an Athlon 2700+
with 333FSB and I expect it will really fly (relatively speaking.) I'm
trying to stay in the socket A world for as long as I can. I don't play
games or do any real CPU intensive work so this should be fine for quite a
while. With this latest upgrade, my system will be Vista capable should I
decide to go that way (running XP w/SP2 right now.)

Thanks for your help Graham. We may be the only ones still reading this
board

Lee
 >> Stay informed about: 4 pin ATX power supply connector question 

Lee M. wrote:
> "Graham W" <graham DeleteThis @his.com.puter.INVALID> wrote in message
> news:46880291$0$8747$ed2619ec@ptn-nntp-reader02.plus.net...
>>
>>
>> Lee MacMillan wrote:
>>> "Graham W" <graham DeleteThis @his.com.puter.INVALID> wrote in message
>>> news:4687d896$0$8744$ed2619ec@ptn-nntp-reader02.plus.net...
>>>>
>>>>
>>>> Lee MacMillan wrote:
>>>>> In the process of swapping out my 8KHA+ for an 8RDA3+. The latter
>>>>> has the extra 4 pin power supply connector. The manual says the 4
>>>>> pins are 2 grounds and 2 12v but my new power supply connector has
>>>>> 1 each of black, red, orange & yellow. Anyone know if the ATX spec
>>>>> has changed since this mobo was made? Am I SOL unless I get a
>>>>> different power supply?
>>>>
>>>> That might be simplest thing to do, Lee. New boards come with a 24
>>>> pin power socket but the PSU makers usually use a connector that has
>>>> 20 + 4 so that a bit of it can be unclipped and used seperately.
>>>>
>>>> HTH
>>>> --
>>>> Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics
>>>> Tutorial WIMBORNE http://www.wessex-astro.org.uk/ Wessex Astro
>>>> Society's Website Dorset UK Info, Meeting Dates, Sites & Maps
>>>> Change 'news' to 'sewn' in my Reply address to avoid my spam filter.
>>>
>>> I found the right connector. There were so many unused connectors
>>> bundled together I just missed it the first time around. Plus it was
>>> confusing since the other 4 pin connector was bundled with the 20 pin
>>> ATX connector.
>>
>> Good!
>>
>> Have you made it go yet?
>>
>>
> Yep, it's running right now with the Athlon 1800+ that was in the 8KHA+.
> The 8RDA3+ with nForce 400 chipset is about 10% faster on the SuperPi
> benchmark than the KT266A chipset. Tomorrow I will install an Athlon
> 2700+ with 333FSB and I expect it will really fly (relatively
> speaking.) I'm trying to stay in the socket A world for as long as I
> can. I don't play games or do any real CPU intensive work so this
> should be fine for quite a while. With this latest upgrade, my system
> will be Vista capable should I decide to go that way (running XP w/SP2
> right now.)
>
> Thanks for your help Graham. We may be the only ones still reading this
> board
>

Well, I think Shep and DaveL look in on a fairly frequent basis but I look
for
new posts each day.

That 2700+ sounds quite good! This system is 2400+ at stock speed
on Win98SE which is now getting quite flaky having lost half of the
USB stuff and not being able to run other USB properly. BTW, it's an
8RDA+ board here with 512k memory.

I've recently joined the opposition and bought a Dell Dimension E520
which comes with a Core 2 duo CPU and Vista Business as standard
for about £240 (don't know what that is in N fl ) The E4300 is very
o/c-able
according to some of the forums who look at these things.

I'm still 'doing things' with it to make it safe for the 'net but its
already got
my old multi card reader in it and I was thinking about a PC-Tel modem
(being the one that the factory fit) since I have a new one in a box here
which I could use to serve as an analogue back-up to the ADSL
connection that the w98 m/c currently uses. The Dell will get plugged
into the D-Link DSL-G624T when it and I are ready for the wider world.

Hey, it's magic how USB pen-drives just get picked up automagically!
But the card reader took 15mins to install itself as it has 4 socket
channels which get assigned as drive letters. All I needed to do was
press 'OK' now and again - magic!

Anyway, glad you're sorted on the PSU front and it is actually working.


--
Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics Tutorial
WIMBORNE http://www.wessex-astro.org.uk/ Wessex Astro Society's Website
Dorset UK Info, Meeting Dates, Sites & Maps
Change 'news' to 'sewn' in my Reply address to avoid my spam filter.
 >> Stay informed about: 4 pin ATX power supply connector question 

"Graham W" <graham.DeleteThis@his.com.puter.INVALID> wrote in message
news:46882984$0$8748$ed2619ec@ptn-nntp-reader02.plus.net...
>
>
> Lee M. wrote:
>> "Graham W" <graham.DeleteThis@his.com.puter.INVALID> wrote in message
>> news:46880291$0$8747$ed2619ec@ptn-nntp-reader02.plus.net...
>>>
>>>
>>> Lee MacMillan wrote:
>>>> "Graham W" <graham.DeleteThis@his.com.puter.INVALID> wrote in message
>>>> news:4687d896$0$8744$ed2619ec@ptn-nntp-reader02.plus.net...
>>>>>
>>>>>
>>>>> Lee MacMillan wrote:
>>>>>> In the process of swapping out my 8KHA+ for an 8RDA3+. The latter
>>>>>> has the extra 4 pin power supply connector. The manual says the 4
>>>>>> pins are 2 grounds and 2 12v but my new power supply connector has
>>>>>> 1 each of black, red, orange & yellow. Anyone know if the ATX spec
>>>>>> has changed since this mobo was made? Am I SOL unless I get a
>>>>>> different power supply?
>>>>>
>>>>> That might be simplest thing to do, Lee. New boards come with a 24
>>>>> pin power socket but the PSU makers usually use a connector that has
>>>>> 20 + 4 so that a bit of it can be unclipped and used seperately.
>>>>>
>>>>> HTH
>>>>> --
>>>>> Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics
>>>>> Tutorial WIMBORNE http://www.wessex-astro.org.uk/ Wessex Astro
>>>>> Society's Website Dorset UK Info, Meeting Dates, Sites & Maps
>>>>> Change 'news' to 'sewn' in my Reply address to avoid my spam filter.
>>>>
>>>> I found the right connector. There were so many unused connectors
>>>> bundled together I just missed it the first time around. Plus it was
>>>> confusing since the other 4 pin connector was bundled with the 20 pin
>>>> ATX connector.
>>>
>>> Good!
>>>
>>> Have you made it go yet?
>>>
>>>
>> Yep, it's running right now with the Athlon 1800+ that was in the 8KHA+.
>> The 8RDA3+ with nForce 400 chipset is about 10% faster on the SuperPi
>> benchmark than the KT266A chipset. Tomorrow I will install an Athlon
>> 2700+ with 333FSB and I expect it will really fly (relatively
>> speaking.) I'm trying to stay in the socket A world for as long as I
>> can. I don't play games or do any real CPU intensive work so this
>> should be fine for quite a while. With this latest upgrade, my system
>> will be Vista capable should I decide to go that way (running XP w/SP2
>> right now.)
>>
>> Thanks for your help Graham. We may be the only ones still reading this
>> board
>>
>
> Well, I think Shep and DaveL look in on a fairly frequent basis but I look
> for
> new posts each day.
>
> That 2700+ sounds quite good! This system is 2400+ at stock speed
> on Win98SE which is now getting quite flaky having lost half of the
> USB stuff and not being able to run other USB properly. BTW, it's an
> 8RDA+ board here with 512k memory.
>
> I've recently joined the opposition and bought a Dell Dimension E520
> which comes with a Core 2 duo CPU and Vista Business as standard
> for about £240 (don't know what that is in N fl ) The E4300 is very
> o/c-able
> according to some of the forums who look at these things.
>
> I'm still 'doing things' with it to make it safe for the 'net but its
> already got
> my old multi card reader in it and I was thinking about a PC-Tel modem
> (being the one that the factory fit) since I have a new one in a box here
> which I could use to serve as an analogue back-up to the ADSL
> connection that the w98 m/c currently uses. The Dell will get plugged
> into the D-Link DSL-G624T when it and I are ready for the wider world.
>
> Hey, it's magic how USB pen-drives just get picked up automagically!
> But the card reader took 15mins to install itself as it has 4 socket
> channels which get assigned as drive letters. All I needed to do was
> press 'OK' now and again - magic!
>
> Anyway, glad you're sorted on the PSU front and it is actually working.
>
>
I have an 8RDA+ as my 2nd desktop. Got it from my son and it runs ok but
many of the caps are bulging/leaking and the CPU voltage fluctates between
1.4 and 1.6 almost constantly. Tried a 2500+ CPU in it a few months ago and
it wouldn't even boot. I'll put the 1800+ in it and sell the 2200+ that is
in it now. It only gets turned on 2 or 3 times a week and then just for
surfing or newsgroups so the slower CPU will be just fine.
 >> Stay informed about: 4 pin ATX power supply connector question 

"Graham W" <graham DeleteThis @his.com.puter.INVALID> wrote in message
news:46882984$0$8748$ed2619ec@ptn-nntp-reader02.plus.net...
> Well, I think Shep and DaveL look in on a fairly frequent basis but I look
> for
> new posts each day.
>

Yeah. I'm still hanging around. I don't game either but I will attempt to
play Half Life ep3 and TF2 when they come out in the fall. I sure hope my
old 8RDA+ can keep up. For everything else I use it for it seems to be just
fine.

DaveL
 >> Stay informed about: 4 pin ATX power supply connector question 

Hi, Graham.

I'm still here! ;<)

I check for new posts every day, but there haven't been any lately. Maybe
everybody else's experience is like mine: I installed my new MF570sli (with
AMD Athlon 64 X2 5000+ in the AM2 slot) back in December and it "just
works". ;<) It was my present to myself to celebrate the end of the Vista
beta. It has been running Vista Ultimate x64 (and dual-booting x86, with a
couple of WinXP's loaded but never used anymore) ever since I got the RTM
version.

It replaced the faithful KDA3+ that had been running for about 3 years.
Well, that one did have a short in one memory slot, but it ran fine using
the other two slots. So I handed it down to my grandson, who turned 4 in
April, and installed a full retail Vista Ultimate x64 on it. His parents
are both computer professionals, but he has the only 64-bit rig in the
family. ;<)

It's good for us lurkers to post now and then, just to let each other know
that we are still here. If we wait until our EPoX mobo has a problem, this
NG might seem to have faded away. And that's a Good Thing!

RC
--
R. C. White, CPA
San Marcos, TX
rc DeleteThis @grandecom.net
Microsoft Windows MVP
(Running Vista Ultimate x64 on EPoX MF570sli)

"Graham W" <graham DeleteThis @his.com.puter.INVALID> wrote in message
news:46882984$0$8748$ed2619ec@ptn-nntp-reader02.plus.net...
>
>
<SNIP>
>
>> Lee MacMillan wrote:
>> Thanks for your help Graham. We may be the only ones still reading this
>> board
>>
>
> Well, I think Shep and DaveL look in on a fairly frequent basis but I look
> for
> new posts each day.
<SNIP>
> --
> Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics Tutorial
 >> Stay informed about: 4 pin ATX power supply connector question 

hi RC,

Sorry to have missed you off the list! It's good to know you are still
around and kicking and sounds like the 4yr old will have fun have fun
with his 'new' acquisition!

Cheers es 73 de Gray.

R. C. White wrote:
> Hi, Graham.
>
> I'm still here! ;<)
>
> I check for new posts every day, but there haven't been any lately.
> Maybe everybody else's experience is like mine: I installed my new
> MF570sli (with AMD Athlon 64 X2 5000+ in the AM2 slot) back in December
> and it "just works". ;<) It was my present to myself to celebrate the
> end of the Vista beta. It has been running Vista Ultimate x64 (and
> dual-booting x86, with a couple of WinXP's loaded but never used
> anymore) ever since I got the RTM version.
>
> It replaced the faithful KDA3+ that had been running for about 3 years.
> Well, that one did have a short in one memory slot, but it ran fine
> using the other two slots. So I handed it down to my grandson, who
> turned 4 in April, and installed a full retail Vista Ultimate x64 on
> it. His parents are both computer professionals, but he has the only
> 64-bit rig in the family. ;<)
>
> It's good for us lurkers to post now and then, just to let each other
> know that we are still here. If we wait until our EPoX mobo has a
> problem, this NG might seem to have faded away. And that's a Good
> Thing!
>
> RC
>
> "Graham W" <graham.RemoveThis@his.com.puter.INVALID> wrote in message
> news:46882984$0$8748$ed2619ec@ptn-nntp-reader02.plus.net...
>>
>>
> <SNIP>
>>
>>> Lee MacMillan wrote:
>>> Thanks for your help Graham. We may be the only ones still reading
>>> this board
>>>
>>
>> Well, I think Shep and DaveL look in on a fairly frequent basis but I
>> look for
>> new posts each day.
> <SNIP>
>> --
>> Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics
>> Tutorial
 >> Stay informed about: 4 pin ATX power supply connector question 

Hi, Graham.

> Cheers es 73 de Gray.

Translation, please? ;^}

RC
--
R. C. White, CPA
San Marcos, TX
rc.RemoveThis@grandecom.net
Microsoft Windows MVP
(Running Vista Ultimate x64 on EPoX MF570sli)

"Graham W" <graham.RemoveThis@his.com.puter.INVALID> wrote in message
news:468911e6$0$8724$ed2619ec@ptn-nntp-reader02.plus.net...
> hi RC,
>
> Sorry to have missed you off the list! It's good to know you are still
> around and kicking and sounds like the 4yr old will have fun have fun
> with his 'new' acquisition!
>
> Cheers es 73 de Gray.
>
> R. C. White wrote:
>> Hi, Graham.
>>
>> I'm still here! ;<)
>>
>> I check for new posts every day, but there haven't been any lately.
>> Maybe everybody else's experience is like mine: I installed my new
>> MF570sli (with AMD Athlon 64 X2 5000+ in the AM2 slot) back in December
>> and it "just works". ;<) It was my present to myself to celebrate the
>> end of the Vista beta. It has been running Vista Ultimate x64 (and
>> dual-booting x86, with a couple of WinXP's loaded but never used
>> anymore) ever since I got the RTM version.
>>
>> It replaced the faithful KDA3+ that had been running for about 3 years.
>> Well, that one did have a short in one memory slot, but it ran fine
>> using the other two slots. So I handed it down to my grandson, who
>> turned 4 in April, and installed a full retail Vista Ultimate x64 on
>> it. His parents are both computer professionals, but he has the only
>> 64-bit rig in the family. ;<)
>>
>> It's good for us lurkers to post now and then, just to let each other
>> know that we are still here. If we wait until our EPoX mobo has a
>> problem, this NG might seem to have faded away. And that's a Good
>> Thing!
>>
>> RC
>>
>> "Graham W" <graham.RemoveThis@his.com.puter.INVALID> wrote in message
>> news:46882984$0$8748$ed2619ec@ptn-nntp-reader02.plus.net...
>>>
>>>
>> <SNIP>
>>>
>>>> Lee MacMillan wrote:
>>>> Thanks for your help Graham. We may be the only ones still reading
>>>> this board
>>>>
>>>
>>> Well, I think Shep and DaveL look in on a fairly frequent basis but I
>>> look for
>>> new posts each day.
>> <SNIP>
>>> --
>>> Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics
>>> Tutorial
 >> Stay informed about: 4 pin ATX power supply connector question 

R. C. White wrote:
> Hi, Graham.
>
>> Cheers es 73 de Gray.
>
> Translation, please? ;^}

It's amateur radio jargon equivalent to 'and best wishes from'
for the three words following 'Cheers'. 8¬)

OK?


--
Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics Tutorial
WIMBORNE http://www.wessex-astro.org.uk/ Wessex Astro Society's Website
Dorset UK Info, Meeting Dates, Sites & Maps
Change 'news' to 'sewn' in my Reply address to avoid my spam filter.
 >> Stay informed about: 4 pin ATX power supply connector question 

And "Gray" = "Graham"?

Ten-Four! Over and Out! ;<)

RC
--
R. C. White, CPA
San Marcos, TX
rc.TakeThisOut@grandecom.net
Microsoft Windows MVP
(Running Windows Live Mail beta in Vista Ultimate x64)

"Graham W" <graham.TakeThisOut@his.com.puter.INVALID> wrote in message
news:46893a3c$0$8716$ed2619ec@ptn-nntp-reader02.plus.net...
>
>
> R. C. White wrote:
>> Hi, Graham.
>>
>>> Cheers es 73 de Gray.
>>
>> Translation, please? ;^}
>
> It's amateur radio jargon equivalent to 'and best wishes from'
> for the three words following 'Cheers'. 8¬)
>
> OK?
>
>
> --
> Graham W http://www.gcw.org.uk/ PGM-FI page updated, Graphics Tutorial
 >> Stay informed about: 4 pin ATX power supply connector question