 |
|
|
|
Next: SY-K7V Dragon Plus...
|
| Author |
Message |
External
Since: Nov 02, 2007
Posts: 2
|
(Msg. 1) Posted: Fri Nov 02, 2007 1:31 pm
Post subject: No post on Tyan Tiger MPX S2466N-4M
Archived from groups: alt>comp>periphs>mainboard>tyan (more info?)
|
|
|
Hello,
we have bought a Tyan S2466N-4M Motherboard with 2* CPU AMD 2800 MP
(Barton Core)
1024 MB registered Kingston RAM (KVR266x72RC25/1024) and a NVIDIA
GeForce FX 5700LE.
Seller says that everything worked fine together. We build up the system
with a new Seasonic S12II 430W ATX 2.2 power supply and started the
system. No beeps on speaker, a blank video screen and only working
CPU-fans and the keyboard lights flashed on short.
RAM, CPU's, power supply and video card were tested with another board
(CPU's as single and not dual) an worked fine.
So we tested the Tiger MPX (all components worked fine on other boards)
- with only one MP 2800+
- only one XP 1600+ (on CPU socket 1 and 2)
- with a Matrox G450 16MB AGP video card
- a S3 2MB PCI video card
- one or two Micron MT36VDDT12872G-265C2 PC2100-25330-Z, 1GB
DDR,266Mhz,Cl2,5, ECC
- a new 400W and a new 500W ATX power supply
We tested only with CPU, with CPU and RAM (both without video card): no
beeps on speaker.
We bought a second Tyan S2466N-4M Motherboard and tested. The same
result as with the secon one: no beeps, no screen, only short
keyboard-flash and running CPU fans.
The Tiger MPX starts runnig automatically when the power supply is
switched on, without pushing the power-switch which is connected on the
board.
Is this a known bug?
What could we done wrong?
Regards,
R. Haugke |
|
| Back to top |
|
 | |
External
Since: Jul 18, 2003
Posts: 23
|
(Msg. 2) Posted: Sat Nov 03, 2007 3:19 am
Post subject: Re: No post on Tyan Tiger MPX S2466N-4M [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Ronald Haugke wrote:
:
: we have bought a Tyan S2466N-4M Motherboard with 2* CPU AMD 2800 MP
:
: We bought a second Tyan S2466N-4M Motherboard and tested. The same
: result as with the secon one: no beeps, no screen, only short
: keyboard-flash and running CPU fans.
:
Have you connected a molex connector to the video card to
provide +5 +12 volts to the card?
Do you have the 20(8?) and 6(?) pin power connectors connected?
:
: The Tiger MPX starts runnig automatically when the power supply is
: switched on, without pushing the power-switch which is connected on the
: board.
:
Sounds like the BIOS was set to restore the state to the
last state, which was power on.
How long are you waiting for the console to "do something"?
It can take several minutes for a Tyan to POST, and then "do
something", and it may NOT be set to display the results, simply
to boot.
Do you have a PS/2 keyboard? It is possible that the USB was
disabled in BIOS if you are using USB keyboards, although I would
think that is unlikely with two mobos.
Also, examine the main connector - I burned the P/S connector
by NOT connecting the molex connector to the board, although this
did not happen overnight.
Bruce
--
------------------------------------------------------------------------
"I like bad!" Bruce Burden Austin, TX.
- Thuganlitha
The Power and the Prophet
Robert Don Hughes |
|
| Back to top |
|
| |
External
Since: Mar 14, 2007
Posts: 2
|
(Msg. 3) Posted: Sat Nov 03, 2007 12:07 pm
Post subject: Re: No post on Tyan Tiger MPX S2466N-4M [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Bruce Burden schrieb:
> Ronald Haugke wrote:
> :
> : we have bought a Tyan S2466N-4M Motherboard with 2* CPU AMD 2800 MP
> :
> : We bought a second Tyan S2466N-4M Motherboard and tested. The same
> : result as with the secon one: no beeps, no screen, only short
> : keyboard-flash and running CPU fans.
> :
> Have you connected a molex connector to the video card to
> provide +5 +12 volts to the card?
>
> Do you have the 20(8?) and 6(?) pin power connectors connected?
> :
> : The Tiger MPX starts runnig automatically when the power supply is
> : switched on, without pushing the power-switch which is connected on the
> : board.
Is eventually the battery bad?
I have seen this behaviour with Abit and Tyan boards, when there was a
bad battery...
Kind regards,
Herwig >> Stay informed about: No post on Tyan Tiger MPX S2466N-4M |
|
| Back to top |
|
| |
External
Since: Mar 10, 2005
Posts: 54
|
(Msg. 4) Posted: Sat Nov 03, 2007 11:50 pm
Post subject: Re: No post on Tyan Tiger MPX S2466N-4M [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
hi ,
i guess that it would start with the right powersupply . followed the
manual instructions ?
i have about the same combo ( with matching ps ) running here and it is
rockstable !
Ronald Haugke says...
> Hello,
>
> we have bought a Tyan S2466N-4M Motherboard with 2* CPU AMD 2800 MP
> (Barton Core)
> 1024 MB registered Kingston RAM (KVR266x72RC25/1024) and a NVIDIA
> GeForce FX 5700LE.
>
> Seller says that everything worked fine together. We build up the system
> with a new Seasonic S12II 430W ATX 2.2 power supply and started the
> system. No beeps on speaker, a blank video screen and only working
> CPU-fans and the keyboard lights flashed on short.
>
> RAM, CPU's, power supply and video card were tested with another board
> (CPU's as single and not dual) an worked fine.
>
> So we tested the Tiger MPX (all components worked fine on other boards)
> - with only one MP 2800+
> - only one XP 1600+ (on CPU socket 1 and 2)
> - with a Matrox G450 16MB AGP video card
> - a S3 2MB PCI video card
> - one or two Micron MT36VDDT12872G-265C2 PC2100-25330-Z, 1GB
> DDR,266Mhz,Cl2,5, ECC
> - a new 400W and a new 500W ATX power supply
>
> We tested only with CPU, with CPU and RAM (both without video card): no
> beeps on speaker.
>
> We bought a second Tyan S2466N-4M Motherboard and tested. The same
> result as with the secon one: no beeps, no screen, only short
> keyboard-flash and running CPU fans.
>
> The Tiger MPX starts runnig automatically when the power supply is
> switched on, without pushing the power-switch which is connected on the
> board.
>
> Is this a known bug?
> What could we done wrong?
>
> Regards,
> R. Haugke
>
--
gravity is still active
-<--@
gruss , wolfgang , v. von gunzo >> Stay informed about: No post on Tyan Tiger MPX S2466N-4M |
|
| Back to top |
|
| |
External
Since: Oct 15, 2007
Posts: 3
|
(Msg. 5) Posted: Sun Nov 04, 2007 10:10 am
Post subject: Re: No post on Tyan Tiger MPX S2466N-4M [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Nov 2, 5:31 am, Ronald Haugke wrote:
> Hello,
>
> we have bought a Tyan S2466N-4M Motherboard with 2* CPU AMD 2800 MP
> (Barton Core)
> 1024 MB registered Kingston RAM (KVR266x72RC25/1024) and a NVIDIA
> GeForce FX 5700LE.
>
> Seller says that everything worked fine together. We build up the system
> with a new Seasonic S12II 430W ATX 2.2 power supply and started the
> system. No beeps on speaker, a blank video screen and only working
> CPU-fans and the keyboard lights flashed on short.
Is the speaker known to be good? polarity on connection for speaker
and power on switch?
>
> RAM, CPU's, power supply and video card were tested with another board
> (CPU's as single and not dual) an worked fine.
>
> So we tested the Tiger MPX (all components worked fine on other boards)
> - with only one MP 2800+
> - only one XP 1600+ (on CPU socket 1 and 2)
> - with a Matrox G450 16MB AGP video card
> - a S3 2MB PCI video card
> - one or two Micron MT36VDDT12872G-265C2 PC2100-25330-Z, 1GB
> DDR,266Mhz,Cl2,5, ECC
> - a new 400W and a new 500W ATX power supply
>
> We tested only with CPU, with CPU and RAM (both without video card): no
> beeps on speaker.
>
> We bought a second Tyan S2466N-4M Motherboard and tested. The same
> result as with the secon one: no beeps, no screen, only short
> keyboard-flash and running CPU fans.
>
> The Tiger MPX starts runnig automatically when the power supply is
> switched on, without pushing the power-switch which is connected on the
> board.
>
> Is this a known bug?
> What could we done wrong?
>
> Regards,
> R. Haugke >> Stay informed about: No post on Tyan Tiger MPX S2466N-4M |
|
| Back to top |
|
| |
External
Since: Nov 04, 2007
Posts: 1
|
(Msg. 6) Posted: Sun Nov 04, 2007 6:02 pm
Post subject: Re: No post on Tyan Tiger MPX S2466N-4M [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Nov 04, 2007
Posts: 1
|
(Msg. 7) Posted: Sun Nov 04, 2007 10:55 pm
Post subject: Re: No post on Tyan Tiger MPX S2466N-4M [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Nov 4, 1:10 pm, midol wrote:
> On Nov 2, 5:31 am, Ronald Haugke wrote:
>
> > Hello,
>
> > we have bought a Tyan S2466N-4M Motherboard with 2* CPU AMD 2800 MP
> > (Barton Core)
> > 1024 MB registered Kingston RAM (KVR266x72RC25/1024) and a NVIDIA
> > GeForce FX 5700LE.
>
> > Seller says that everything worked fine together. We build up the system
> > with a new Seasonic S12II 430W ATX 2.2 power supply and started the
> > system. No beeps on speaker, a blank video screen and only working
> > CPU-fans and the keyboard lights flashed on short.
>
> Is the speaker known to be good? polarity on connection for speaker
> and power on switch?
>
>
>
> > RAM, CPU's, power supply and video card were tested with another board
> > (CPU's as single and not dual) an worked fine.
>
> > So we tested the Tiger MPX (all components worked fine on other boards)
> > - with only one MP 2800+
> > - only one XP 1600+ (on CPU socket 1 and 2)
> > - with a Matrox G450 16MB AGP video card
> > - a S3 2MB PCI video card
> > - one or two Micron MT36VDDT12872G-265C2 PC2100-25330-Z, 1GB
> > DDR,266Mhz,Cl2,5, ECC
> > - a new 400W and a new 500W ATX power supply
>
> > We tested only with CPU, with CPU and RAM (both without video card): no
> > beeps on speaker.
>
> > We bought a second Tyan S2466N-4M Motherboard and tested. The same
> > result as with the secon one: no beeps, no screen, only short
> > keyboard-flash and running CPU fans.
>
> > The Tiger MPX starts runnig automatically when the power supply is
> > switched on, without pushing the power-switch which is connected on the
> > board.
>
> > Is this a known bug?
> > What could we done wrong?
>
> > Regards,
> > R. Haugke
If you have ECC enabled in the bios, it WILL take up to 2 minutes to
post.
scared the hell out of me the first time  >> Stay informed about: No post on Tyan Tiger MPX S2466N-4M |
|
| Back to top |
|
| |
External
Since: Nov 02, 2007
Posts: 2
|
(Msg. 8) Posted: Mon Nov 05, 2007 5:51 pm
Post subject: Re: No post on Tyan Tiger MPX S2466N-4M [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Hello,
one Board now runs with the two MP 2800+. Why not the days before - I
don't know ... 
The 2nd one does not post with the two 2800+. We made a cmos-reset so
ecc-checking should be disabled.
about the questions:
- there is no molex-connector on video-card
- I waited 5min for post
- a PS2-Keyboard
- battery is OK
- power-supply is OK, tested both with 550W
Now 2nd board is running with the 430W
- speaker is good
Regards,
Ronald >> Stay informed about: No post on Tyan Tiger MPX S2466N-4M |
|
| Back to top |
|
| |
External
Since: Jul 18, 2003
Posts: 23
|
(Msg. 9) Posted: Tue Nov 06, 2007 3:35 am
Post subject: Re: No post on Tyan Tiger MPX S2466N-4M [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Ronald Haugke wrote:
:
: one Board now runs with the two MP 2800+. Why not the days before - I
: don't know ...
:
Okay, so have you swapped CPUs, and if so, does it always
work with one CPU?
Do you have a valid memory configuration, with memory in
both sets of CPU memory slots? (I seem to remember that there
are twined slots, and both sets need memory in them).
Given that, is the BIOS set up to accept two CPUs?
Bruce
--
------------------------------------------------------------------------
"I like bad!" Bruce Burden Austin, TX.
- Thuganlitha
The Power and the Prophet
Robert Don Hughes >> Stay informed about: No post on Tyan Tiger MPX S2466N-4M |
|
| Back to top |
|
| |
External
Since: Nov 10, 2007
Posts: 1
|
(Msg. 10) Posted: Sat Nov 10, 2007 1:54 pm
Post subject: Re: No post on Tyan Tiger MPX S2466N-4M [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Hi,
Finally found out that my S2466 board has LinuxBIOS flashed into the
EEPROM. This is without VGA support, so a VGA monitor hooked up will
stay blank.
However, via COM1, you can monitor the Boot progress at 115200 BAUD.
Thanks,
Ruud >> Stay informed about: No post on Tyan Tiger MPX S2466N-4M |
|
| Back to top |
|
| |
| Related Topics: | Tyan Tiger S2466N-4M won't post with 266mhz FSB! - Calling all Tyan tiger gurus! I've been trying to get this board to post at 266mhz for awhile now. Currently I have two MP 2400 CPUs, and they do post at 200mhz. However, when I set the jumpers to 266mhz for CPU1 and CPU2 then the hard drive light comes...
Tyan Tiger S2466N-4M - what video card works with it - Hi, I'm having to deal with about 10 workstations built around the S2466N-4M motherboard. Basically, I'm having really only one problem: these boards are eating up the Asus GeForce4 Ti4200 (V9280/TD) video cards faster then Asus can replace them! The....
Tyan Tiger s2668ANR, stops at POST! - Im having problem with my newly bought tyan tiger s2668ANR mainboard... 1. I was using a raid configuration of a 3ware 7500-4 lp with 4 drives in a raid-5 array, 2x intel xeon 2,8 Ghz (533fsb); 2x 256 MB ddr-2100 ram (works 100%); the psu is a antec..
Tyan Tiger s2668ANR POST problem - Hello, I got the Tyan Tiger s2668ANR mainboard with the following configuration: Processors: 2x Intel Xeon 2.4Ghz 533Mhz 512kb/L2 (boxed) Memory: 2x 512mb OEM Videocard: Asus v9900/TD 128mb PSU: Q-Tec 550watt Gold dua...
Tyan Tiger i7505 S2668 post code E2 - Had some fits last night with 2 system builds on the Tyan i7505. Post code came back E2. Long story short, watch your MEMORY. This board is sensitive. NO Registered RAM is supported. Good luck, Jeff |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Search
Profile
Private Messages
Log in
