On power-up, fans just 'twitch' -- AK79G MAX

Hi -- I switched this MB into another case; in the old case, it and all
periphs worked fine. while I was doing the change-over, I added RAM. Now,
it won't work.

When I turn on the power supply switch, the red -protect-your-CPU LED comes
on, but, when I push my front-panel ON-switch, the fans don't start and
there is no boot -- the fans just 'twitch' once, and then stop. To re-try a
boot, I must unplug the power supply at the cord.

I've tried everything I can think of; even talked to AOpen tech supp, and
they replaced my board -- ; I still have the same symptoms.

I'm using an AMD 64. Thx for your help. -- Bob

On Sun, 9 Apr 2006 02:13:40 -0700, "BobEvans3200"
<bobevans3200.TakeThisOut@hotmail.com> wrote:

>Hi -- I switched this MB into another case; in the old case, it and all
>periphs worked fine. while I was doing the change-over, I added RAM. Now,
>it won't work.
>
>When I turn on the power supply switch, the red -protect-your-CPU LED comes
>on, but, when I push my front-panel ON-switch, the fans don't start and
>there is no boot -- the fans just 'twitch' once, and then stop. To re-try a
>boot, I must unplug the power supply at the cord.
>
>I've tried everything I can think of; even talked to AOpen tech supp, and
>they replaced my board -- ; I still have the same symptoms.
>
>I'm using an AMD 64. Thx for your help. -- Bob
>
Have you tried it with just your old memory?
I had a similar problem with my AX4SPE max II board - a dodgy stick of
memory stopped it dead at boot.

Regards,



--
Stephen Howard - Woodwind repairs & period restorations
www.shwoodwind.co.uk
Emails to: showard{whoisat}shwoodwind{dot}co{dot}uk