sb61g2: Processor clock

Hi:

If you have trouble loading WinXP or Linux, You might have the
incorrect memory timing or incompatible DDR memory for your Intel 865
chipset.

Located your DRAM timing in the BIOS and try following DDR timing:

1. Change DRAM timing Selectable to Manual
2. CAS change to 2.5
3. Active to pregcharge Delay to 7
4. DRAM RAS# to CAS# Delay to 3
5. DRAM RAS# to precharge to 3

Good Luck



chuckgg.RemoveThis@sanna.com (Chuck C) wrote in message news:<75bcb45e.0307040928.77090151.RemoveThis@posting.google.com>...
 > Hello,
 >
 > I just put together a XPC using sb61g2 motherboard and a P4 2.4 Ghz
 > hyperthread processor.
 >
 > I had occasional seg faults and other flakiness while trying to
 > install XP and Gentoo Linux. These were fixed by changing the cpu
 > clock in the bios from 200Mhz to 180mhz. This reduced my overal speed
 > from 2.4 Mhz to 2.166 Mhz.
 >
 > Anyone have any comments on this?
 >
 > Do you think I got a bad P4 or bad motherboard?
 >
 > Thanks,
 >
 > Chuck
 >
 > System:
 >
 > Sb61g2 XPC
 > P4 2.4 Hyperthread
 > 1 Gig DDR3200 Low Latency (2 cas) Patriot memory
 > 120 gig SATA (seagate baracuda V)<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: sb61g2: Processor clock