Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

E stepping opterons on s2885

  
   Hardware Problem Solving Community! (Home) -> Tyan RSS
Next:  Striping data across platters in a single hard di..  
Author Message
Ward Taylor

External


Since: Jan 04, 2006
Posts: 5



(Msg. 1) Posted: Wed Jan 04, 2006 8:59 pm
Post subject: E stepping opterons on s2885
Archived from groups: alt>comp>periphs>mainboard>tyan (more info?)
Hi
Has anyone dared to try E stepping or dual-core opterons on the thunder
k8w with a lower revision number than the 04MOAb? Would be interesting
to know if you had any luck.
Thanks for any and all replys
Ward

 >> Stay informed about: E stepping opterons on s2885 
Back to top
Login to vote
Phil Shafer

External


Since: Jan 06, 2006
Posts: 1



(Msg. 2) Posted: Thu Jan 05, 2006 9:55 pm
Post subject: Re: E stepping opterons on s2885 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"Ward Taylor" <wardtayl.DeleteThis@st-tel.net> wrote in message
news:3f788$43bc8b76$41a14eaa$12474@st-tel.net...
> Hi
> Has anyone dared to try E stepping or dual-core opterons on the thunder
> k8w with a lower revision number than the 04MOAb? Would be interesting to
> know if you had any luck.
> Thanks for any and all replys
> Ward

Why don't you be the first one to try this out and let us know how it
worked? Smile

 >> Stay informed about: E stepping opterons on s2885 
Back to top
Login to vote
Ward Taylor

External


Since: Jan 04, 2006
Posts: 5



(Msg. 3) Posted: Fri Jan 06, 2006 5:21 pm
Post subject: Re: E stepping opterons on s2885 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
I knew it, we do have a sense of humor!:>)

Phil Shafer wrote:
> "Ward Taylor" <wardtayl RemoveThis @st-tel.net> wrote in message
> news:3f788$43bc8b76$41a14eaa$12474@st-tel.net...
>
>>Hi
>>Has anyone dared to try E stepping or dual-core opterons on the thunder
>>k8w with a lower revision number than the 04MOAb? Would be interesting to
>>know if you had any luck.
>>Thanks for any and all replys
>>Ward
>
>
> Why don't you be the first one to try this out and let us know how it
> worked? Smile
>
>
 >> Stay informed about: E stepping opterons on s2885 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
GS12 (S5103) 3.2E Prescott stepping C0 problem - We have two GS12 with P4 3.2E stepping C0 which are running only at 2.8GHz. Two other boxes with 3.2E stepping D0 are running fine. Someone out there having the same problem? BIOS 1.02 straight from Taiwan didn't change anything. Cheers

Thunder K8W (S2885) and RAM - Hi all, Having quite a bit of trouble getting my brand new S2885 to access all 2gb of ram. I'm using the recommended RAM by Kingston, 512mb sticks x4. system seems to work great using 512mb. however, as soon as I install another stick, i get a variety of...

Thunder K8W (s2885) - Hi All, Does anyone know how to post bios errors to tyan?' I've noticed a few problems with my board and i tink there bios related. 1) When my system is just turned on, it takes about 1,5 minutes for the first ide harddisk to spin-up and be detected. (...

s2885 and usb2 - Has the dust settled on using usb2 with the s2885. I've read there is a problem using the Adaptec usb2, but when you read the adaptec website, it makes it sound like the windows driver is the culprit, not their card. I would normally think that is bull,....

tyan S2885 and TSM - I have updated TSM wit 2.23 version and now TSM detect my motherboard as a S2880 How tell to TSM 2.23 than my card is a S2885 to obtain temp processor, Fan Speed for example Configuration : S2885 Bios Rev 2.02 1 serial ATA 5 SCSI disk on 2940 Adaptec..
   Hardware Problem Solving Community! (Home) -> Tyan All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]