Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

How can I tel if it's a k6 III at 400 mhz

  
   Hardware Problem Solving Community! (Home) -> Soyo RSS
Next:  Shuttle DVD-RW CR-40 Drive - Slow?  
Author Message
Richard

External


Since: May 09, 2006
Posts: 8



(Msg. 1) Posted: Tue May 09, 2006 2:55 pm
Post subject: How can I tel if it's a k6 III at 400 mhz
Archived from groups: alt>comp>periphs>mainboard>soyo (more info?)
Hi,

I just installed an AMD k6 3/400afr cpu on my socket 7. I changed the speed
from 300 to 400 on sw1. How could I find out these specs running under Win
98.

Would the + in AMD-K6(tm) 3D + Processor, be the answer to the k6 III
presense?

Regards

Richard

 >> Stay informed about: How can I tel if it's a k6 III at 400 mhz 
Back to top
Login to vote
ffgeorge

External


Since: Jan 31, 2005
Posts: 33



(Msg. 2) Posted: Tue May 09, 2006 9:42 pm
Post subject: Re: How can I tel if it's a k6 III at 400 mhz [Login to view extended thread Info.]
Imported from groups: per prev. post (more info?)
This message is not archived

 >> Stay informed about: How can I tel if it's a k6 III at 400 mhz 
Back to top
Login to vote
Richard

External


Since: May 09, 2006
Posts: 8



(Msg. 3) Posted: Tue May 09, 2006 9:42 pm
Post subject: Re: How can I tell if it's a k6 III at 400 mhz [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Thanks George,

The diag only specifies "AMD-K6(tm) 3D + Processor" at 400 Mhz. It is not
explicit as to wether it is a k6-2 or a k6-3 (unless the + means it is a
k6-3)

Any other suggestions?

Regards

Richard
 >> Stay informed about: How can I tel if it's a k6 III at 400 mhz 
Back to top
Login to vote
ffgeorge

External


Since: Jan 31, 2005
Posts: 33



(Msg. 4) Posted: Wed May 10, 2006 2:26 am
Post subject: Re: How can I tell if it's a k6 III at 400 mhz [Login to view extended thread Info.]
Imported from groups: per prev. post (more info?)
Back to top
Login to vote
Richard

External


Since: May 09, 2006
Posts: 8



(Msg. 5) Posted: Wed May 10, 2006 9:05 am
Post subject: Re: How can I tell if it's a k6 III at 400 mhz [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Thanks George,

I did not liked the license on Everest.

I used cpu-z and got my answers. It is an amd k6 III.

It should be between 1.5 to 3 times faster than the 300 mhz K6-II I had. It
is fairly obvious on photo processing!

Thanks again

Richard
 >> Stay informed about: How can I tel if it's a k6 III at 400 mhz 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
PC2100 w/ 333 MHz Barton and Soyo KT600 Ultra PE - I'm building a system using: Soyo SY-KT600 Ultra Platinum Edition Motherboard Athlon XP 2500+ Barton PC2100 sticks of several sizes and makes The CPU's FSB rating is 333 MHz. Does that mean I can also run it at 266 MHz so as to synchronize it with the...

Setting up motherboard on tray - Hi: Please don't laugh, but I'm installing a mainboard onto a chassis for the very first time, and I have a really simple hardware question. Does the mainboard (Soyo KT600 Dragon Ultra Platinum) simply sit on the mainboard tray? Is it supposed to be..

Computer will not boot, only beep three times at me. - When the computer is booted it will only make three beeps, followed by a short pause, then three more beeps. It will just do this over and over. No video or anything else will happen. I've tried reinstalling the CPU and using a different power fan but...

Help With K7V Dragon Plus! board? - Hi I problem I have with the board is it doesn't want to boot. I swaped the memory , video card and it still doesn't boot. The problem everytime the board gets the power it shuts off. I called SOYO and I was told that the CPU fan is not spinning higher....

KT333 Dragon Ultra disk probs - I'm getting the following errors on startup in the event viewer: The driver detected a controller error on \Device\Harddisk2\D and The driver detected a controller error on \Device\Harddisk3\D Today it blue screened so that is why I went to look in..
   Hardware Problem Solving Community! (Home) -> Soyo All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]