Using tv-out on Biostar M7NCG400

FAQ

Profile

Using tv-out on Biostar M7NCG400

Hardware Problem Solving Community! (Home) -> General Discussion

Next: 2 MBs and still no boot

Author

Message

Christian Stade-Sc

External

Since: Oct 06, 2004
Posts: 11

(Msg. 1) Posted: Sun Oct 24, 2004 3:42 pm Post subject: Using tv-out on Biostar M7NCG400 Archived from groups: alt>comp>periphs>mainboard (more info?)

Hi guys, i bought myself a Biostar M7NCG 400 mainboard. In addition I bought the tv-out cable. First of all I found no information how to plug the cable on the pin header. So I installed it the way I picked the red-cable to pin1 one mentioned in the manual. On the plug of the cable the red seems to have a small arrow. But I can't make it work. I tried WinXP and used NView to clone the desktop. But no picture was given to the tv. Has anyone get this started? Need help please. -- http://www.tafkas.org >> Stay informed about: Using tv-out on Biostar M7NCG400

Display posts from previous:

Related Topics:

Biostar M7NCD Pro, no IDE - Here's the deal: Installed a new Biostar M7NCD Pro and the upgrade wend pretty flawlessly. All the devices were identified (after installing the drivers from the CD). I have no IDE devices recognized in the Device Manager. My system has an IDE CD-RW,...

Biostar M7VIW and GeForce 4 MX 440 - I am building a new PC and having issues. The motherboard is a Biostar M7VIW with AMD Athlon XP 1600. The video card is a PNY GeForce 4 MX 440. When I power up the system, I do not get any video at all. The drives spin up but I don't even get a beep from...

Biostar M7VKQ PRO shutdown after 5 sec? - Hello, I have a Biostar M7VKQ PRO mainboard that shuts itself off after 5 seconds. The board is on an insulated pad, on a bench, and not in a case. I have swapped cpus, power supplies, cpu fans and tried powering up with/without the hard drive and ram..

@BIOSTAR MOBO W/USB 2.0, DRIVERS? - Hello there: I got a Biostar motherboard w/USB 2.0 (M7NCD PRO) but when I try to install the drivers from the cd, it tells me to go to Microsoft for SP1. Can I get just the USB drivers without getting the whole package. Where could I find those drivers?...

Biostar M7VIT Pro problems - I installed the new board (Athlon 2600+ 333 and 256 megs PC2700) and ran into troubles while installing the new OS on the new WD hard drive. It gets to the point where it says "Starting Windows" and then it either freezes up or I get one of nu...

	Hardware Problem Solving Community! (Home) -> General Discussion	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum