Welcome to PCForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

upgrade s2885 with bios version 102

 
   Hardware Problem Solving Community! (Home) -> Tyan RSS
Next:  very slow ide performance with tyan s2462 - setup..  
Author Message
galerien1

External


Since: Feb 04, 2004
Posts: 6



(Msg. 1) Posted: Sat Feb 07, 2004 2:40 pm
Post subject: upgrade s2885 with bios version 102
Archived from groups: alt>comp>periphs>mainboard>tyan (more info?)

after upgrade bios with v102, my computer reboot after try to load
xmabus.sys. unable to
complete boot on windows XP

Configuration :
windows xp professionnal
opteron 246
160 Gb SATA (boot disk)
Adaptec 29160 with 5 disk ulta wide (3x34Gb and 2x9Gb)
1024 Mb ECC
leadtek Winfast A250 ultra TD agp 4x

If i flash bios with v101, i have no problem. Setting on bios is identially
between v101 and v102.

Do you have an idea ?

 >> Stay informed about: upgrade s2885 with bios version 102 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
s2885 and 1.01i beta-bios - after flashing the bios the computer will restart after a shut down. Any Ideas how to fix this?

Tiger s2460 Dual AMD BIOS bug ? version 1.03 - Hi Have been using a Tiger s2460 for the past couple of years and decided to upgrade the CPU to two Athlon XP1800's ( was running two 1.33's earlier). Bios version 1.03, was stable and initial boot was successful. I decided out of curiosity to increase....

Thunder K8W (S2885) and RAM - Hi all, Having quite a bit of trouble getting my brand new S2885 to access all 2gb of ram. I'm using the recommended RAM by Kingston, 512mb sticks x4. system seems to work great using 512mb. however, as soon as I install another stick, i get a variety of...

Thunder K8W (s2885) - Hi All, Does anyone know how to post bios errors to tyan?' I've noticed a few problems with my board and i tink there bios related. 1) When my system is just turned on, it takes about 1,5 minutes for the first ide harddisk to spin-up and be detected. (...

problem with S2885 and POWER SWITCH - Hi, I have a problem between S2885 with opteron 246 and ZIPPY power RHD-6460P My config : S2885 with 1x Opteron 246 1 Gb ram Corsair PC 2700 ECC Leadtek A250 ultra (Geforce 4600 Ti) Adaptec 29160 with 6 hdd 32Go SCA PS2x2 redundant Zippy RHD-6460P..
   Hardware Problem Solving Community! (Home) -> Tyan All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]