 |
|
|
|
Next: 2013 and memory slot 2 & 3 problem
|
| Author |
Message |
External
Since: Oct 08, 2003
Posts: 1
|
(Msg. 1) Posted: Wed Oct 08, 2003 3:28 pm
Post subject: va-503+ JE3333 bios, cannot get IRQ assigned for video
Archived from groups: alt>comp>periphs>mainboard>fic (more info?)
|
|
|
I've been running until now with 'assign IRQ for VGA' set to disabled.
Recently installed an sis305 32mB AGP card and discovered the 3D
won't work without and IRQ assigned, so I enabled that option in bios.
I have been trying for the last week with no success:
have disabled apci in win98se,
disabled IRQ routing
re-flashed the bios with all the clear switches (ESCD, CMOS etc)
tried a standard PCI video card (still no video IRQ)
reinstalled the via hyperion drivers
the adjacent PCI slot is empty
free IRQ's are 3, 5, 7, 9, 10,11
have booted to linux and dos
nothing will get me an IRQ for video.
Help!?
Curt |
|
| Back to top |
|
 | |
External
Since: Feb 21, 2004
Posts: 143
|
(Msg. 2) Posted: Thu Oct 09, 2003 4:10 am
Post subject: Re: va-503+ JE3333 bios, cannot get IRQ assigned for video [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
There is a setting named "reset configuration" (or something similar)
in the PCI/PNP setup menu, this causes the mobo to discard old
settings for pci/agp devices and acquire new settings. Enable this
setting and reboot and see what happens. Hope this helps, this is
just a guess. Also, you might try "init AGP first" so the mobo looks
to initialize the agp vid card first.
--
Best regards,
Kyle
tired of spam, no email address
"CURT DODDS" <CURT DeleteThis @REMOVE.css-asics.com> wrote in message
news:0bp8ov47tnvpaq4701pvivg4ce1lbronk4@4ax.com...
| I've been running until now with 'assign IRQ for VGA' set to
disabled.
| Recently installed an sis305 32mB AGP card and discovered the 3D
| won't work without and IRQ assigned, so I enabled that option in
bios.
|
| I have been trying for the last week with no success:
| have disabled apci in win98se,
| disabled IRQ routing
| re-flashed the bios with all the clear switches (ESCD, CMOS etc)
| tried a standard PCI video card (still no video IRQ)
| reinstalled the via hyperion drivers
| the adjacent PCI slot is empty
| free IRQ's are 3, 5, 7, 9, 10,11
| have booted to linux and dos
| nothing will get me an IRQ for video.
|
| Help!?
| Curt
| |
|
| Back to top |
|
| |
External
Since: Oct 10, 2003
Posts: 4
|
(Msg. 3) Posted: Fri Oct 10, 2003 3:38 am
Post subject: Re: va-503+ JE3333 bios, cannot get IRQ assigned for video [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Thu, 9 Oct 2003 01:10:44 -0500, "Kyle Brant" <me.RemoveThis@privacy.net>
wrote:
>There is a setting named "reset configuration" (or something similar)
>in the PCI/PNP setup menu, this causes the mobo to discard old
>settings for pci/agp devices and acquire new settings. Enable this
>setting and reboot and see what happens. Hope this helps, this is
>just a guess. Also, you might try "init AGP first" so the mobo looks
>to initialize the agp vid card first.
I have enabled the 'reset configuration data' dozens of times.
Also enabled pnp and disabled pnp operating system.
Tried init AGP first and init PCI first.
All possible combinations of all of these.
Nothing I do will get me an IRQ for either the AGP or a PCI
video card.
The Bios version is JE4333. (Subject was a typo)<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: va-503+ JE3333 bios, cannot get IRQ assigned for video |
|
| Back to top |
|
| |
External
Since: Feb 21, 2004
Posts: 143
|
(Msg. 4) Posted: Fri Oct 10, 2003 5:25 am
Post subject: Re: va-503+ JE3333 bios, cannot get IRQ assigned for video [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Do this: put a blank floppy in the floppy drive, change boot seek to
a:, c:. Now on reboot, the machine will hang booting from the floppy,
and you can see the BIOS assignment of IRQs on the monitor. Is the
vid card getting an IRQ? If so, then the problem is with windows.
Have you installed the VIA 4-1 miniport IRQ driver?
--
Best regards,
Kyle
tired of spam, no email address
"Curt Dodds" <curtdodds DeleteThis @REMOVE.earthlink.net> wrote in message
news:tqvbov0hi2afqt9ta0sevhb02n58002ia3@4ax.com...
| On Thu, 9 Oct 2003 01:10:44 -0500, "Kyle Brant" <me DeleteThis @privacy.net>
| wrote:
|
| >There is a setting named "reset configuration" (or something
similar)
| >in the PCI/PNP setup menu, this causes the mobo to discard old
| >settings for pci/agp devices and acquire new settings. Enable this
| >setting and reboot and see what happens. Hope this helps, this is
| >just a guess. Also, you might try "init AGP first" so the mobo
looks
| >to initialize the agp vid card first.
|
| I have enabled the 'reset configuration data' dozens of times.
| Also enabled pnp and disabled pnp operating system.
| Tried init AGP first and init PCI first.
| All possible combinations of all of these.
| Nothing I do will get me an IRQ for either the AGP or a PCI
| video card.
| The Bios version is JE4333. (Subject was a typo) >> Stay informed about: va-503+ JE3333 bios, cannot get IRQ assigned for video |
|
| Back to top |
|
| |
External
Since: Apr 04, 2004
Posts: 8
|
(Msg. 5) Posted: Fri Oct 10, 2003 5:51 am
Post subject: Re: va-503+ JE3333 bios, cannot get IRQ assigned for video [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Oct 10, 2003
Posts: 4
|
(Msg. 6) Posted: Fri Oct 10, 2003 7:41 am
Post subject: Re: va-503+ JE3333 bios, cannot get IRQ assigned for video [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Oct 10, 2003
Posts: 4
|
(Msg. 7) Posted: Sat Oct 11, 2003 8:03 am
Post subject: Re: va-503+ JE3333 bios, cannot get IRQ assigned for video [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Fri, 10 Oct 2003 02:25:10 -0500, "Kyle Brant" <me.DeleteThis@privacy.net>
wrote:
>Do this: put a blank floppy in the floppy drive, change boot seek to
>a:, c:. Now on reboot, the machine will hang booting from the floppy,
>and you can see the BIOS assignment of IRQs on the monitor. Is the
>vid card getting an IRQ? If so, then the problem is with windows.
>Have you installed the VIA 4-1 miniport IRQ driver?
I did boot with a blank floppy. No IRQ assignment is displayed.
The 'Award Software System Configurations' window is displayed
showing the processor memory disks and memory banks.
Then shows Primary Master HDD S.M.A.R.T. Capability.....disabled
and
Verifying DMI Pool Data ......
then
Non-System disk ..etc
I strongly suspect the bios or motherboard is the problem.
I have tried various via 4-n-1 drivers from year 2000 to current.
I also boot to four versions of Linux (Redhat, Mandrake, Gentoo,
Debian) They all show the very same IRQ assignment.
Thanks for your time & trouble,
Curt<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: va-503+ JE3333 bios, cannot get IRQ assigned for video |
|
| Back to top |
|
| |
External
Since: Oct 09, 2003
Posts: 22
|
(Msg. 8) Posted: Sat Oct 11, 2003 8:03 am
Post subject: Re: va-503+ JE3333 bios, cannot get IRQ assigned for video [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Curt,
If no IRQ assignment is displayed at POST under the Award Software
System Configuration, then you need to enter BIOS SETUP, and under
section PNP/PCI Configuration, either change "Resources Controlled By"
or "PNP OS Installed" to the option it is not currently at, I forget
which of the two is the culprit. Try "Resources Controlled By" first.
Changing one of the two should reveal the IRQ assignment at POST.
Regards,
Tim
Curt Dodds wrote in message news:<2o3fov8oiac7lpr1rrad2f6scdf3k7os3u.DeleteThis@4ax.com>...
> I did boot with a blank floppy. No IRQ assignment is displayed.
> The 'Award Software System Configurations' window is displayed
> showing the processor memory disks and memory banks.
> Then shows Primary Master HDD S.M.A.R.T. Capability.....disabled
> and
> Verifying DMI Pool Data ......
> then
> Non-System disk ..etc
>
> I strongly suspect the bios or motherboard is the problem.
> I have tried various via 4-n-1 drivers from year 2000 to current.
> I also boot to four versions of Linux (Redhat, Mandrake, Gentoo,
> Debian) They all show the very same IRQ assignment.
>
> Thanks for your time & trouble,
> Curt<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: va-503+ JE3333 bios, cannot get IRQ assigned for video |
|
| Back to top |
|
| |
External
Since: Oct 10, 2003
Posts: 4
|
(Msg. 9) Posted: Sat Oct 11, 2003 11:39 pm
Post subject: Re: va-503+ JE3333 bios, cannot get IRQ assigned for video [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On 11 Oct 2003 04:35:13 -0700, tcsenter RemoveThis @yahoo.com (Tim) wrote:
>Curt,
>
>If no IRQ assignment is displayed at POST under the Award Software
>System Configuration, then you need to enter BIOS SETUP, and under
>section PNP/PCI Configuration, either change "Resources Controlled By"
>or "PNP OS Installed" to the option it is not currently at, I forget
>which of the two is the culprit. Try "Resources Controlled By" first.
>
>Changing one of the two should reveal the IRQ assignment at POST.
>
>Regards,
>
>Tim
>
>
>Curt Dodds wrote in message news:<2o3fov8oiac7lpr1rrad2f6scdf3k7os3u RemoveThis @4ax.com>...
>
>> I did boot with a blank floppy. No IRQ assignment is displayed.
>> The 'Award Software System Configurations' window is displayed
>> showing the processor memory disks and memory banks.
>> Then shows Primary Master HDD S.M.A.R.T. Capability.....disabled
>> and
>> Verifying DMI Pool Data ......
>> then
>> Non-System disk ..etc
>>
>> I strongly suspect the bios or motherboard is the problem.
>> I have tried various via 4-n-1 drivers from year 2000 to current.
>> I also boot to four versions of Linux (Redhat, Mandrake, Gentoo,
>> Debian) They all show the very same IRQ assignment.
>>
>> Thanks for your time & trouble,
>> Curt<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: va-503+ JE3333 bios, cannot get IRQ assigned for video |
|
| Back to top |
|
| |
| Related Topics: | 503+, & 2013 BIOS PW's - I used a user PW on the PA-2013 for checking as it halts for PW after HD's and CDROM's display, before continuing boot. Too many missed KB halts. :-{ On the 503+ this does not happen, it seems that this only applies to entering BIOS, for user and..
Latest BIOs FIC 503+ - My BIOs has never been updated. It is version 1.15JE33. What is the latest and best update I can get? Thanks Toots
AD11 will not take ABA46 Bios - Followed all the directions for flashing bios and nothing happens from A: prompt. Computer runs fine for day or two with Windows XP then it won't even start in SAFE MODE? Replaced HD & Ribbon cord, video card, shut down DVD and burner and floppy dr...
BIOS DEAD ? NO PANIC, go to w w w . f l a s h b i o s ... - BIOS DEAD ? NO PANIC, go to w w w . f l a s h b i o s . o r g Is your bios dead by accident ? Got you an error by flashing it, or a dirty virus has killed it ? NO PANIC !!!! Go to my site: The Flashbios Site !!!!!!!!!!!!!!!!!! I have a very chea...
FIC 486-PIO-3 BIOS Flash Fails Every Time - I'm trying to flash the BIOS on an old FIC 486-PIO-3 motherboard, but the flash utility fails before it flashes the BIOS. Details: · FIC 486-PIO-3 (486-PIO3 silkscreened on the motherboard); Award Modular BIOS v4.50G; current BIOS version 1.15G105;.. |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
